v1.15 release

Corrected OpenVPN probe to support pre-shared secret
	mode (OpenVPN port-sharing code is... wrong). Thanks
	to Kai Ellinger for help in investigating and
	testing.

	Added an actual TLS/SSL probe.

	Added configurable --on-timeout protocol
	specification.

	Added a --anyprot protocol probe (equivalent to what
	--ssl was).

	Makefile respects the user's compiler and CFLAG
	choices (falling back to the current values if
	undefined), as well as LDFLAGS.
	(Michael Palimaka)

	Added "After" and "KillMode" to systemd.sslh.service
	(Thomas Weißschuh).

	Added LSB tags to etc.init.d.sslh
	(Thomas Varis).

ChangeLog

@@ -0,0 +1,235 @@
+v1.15:	27JUL2013
+	Added --transparent option for transparent proxying.
+	See README for iptables magic and capability
+	management.
+
+	Fixed bug in sslh-select: if number of opened file
+	descriptor became bigger than FD_SETSIZE, bad things
+	would happen.
+
+	Fixed bug in sslh-select: if socket dropped while
+	defered_data was present, sslh-select would crash.
+
+	Increased FD_SETSIZE for Cygwin, as the default 64
+	is too low for even moderate load.
+
+v1.14: 21DEC2012
+	Corrected OpenVPN probe to support pre-shared secret
+	mode (OpenVPN port-sharing code is... wrong). Thanks
+	to Kai Ellinger for help in investigating and
+	testing.
+
+	Added an actual TLS/SSL probe.
+
+	Added configurable --on-timeout protocol
+	specification.
+
+	Added a --anyprot protocol probe (equivalent to what
+	--ssl was).
+
+	Makefile respects the user's compiler and CFLAG
+	choices (falling back to the current values if
+	undefined), as well as LDFLAGS. 
+	(Michael Palimaka)
+
+	Added "After" and "KillMode" to systemd.sslh.service
+	(Thomas Weißschuh).
+
+	Added LSB tags to etc.init.d.sslh
+	(Thomas Varis).
+
+v1.13: 18MAY2012
+	Write PID file before dropping privileges.
+
+	Added --background, which overrides 'foreground'
+	configuration file setting.
+
+	Added example systemd service file from Archlinux in
+	scripts/
+	https://projects.archlinux.org/svntogit/community.git/tree/trunk/sslh.service?h=packages/sslh
+	(Sébastien Luttringer)
+
+v1.12: 08MAY2012
+	Added support for configuration file.
+
+	New protocol probes can be defined using regular
+	expressions that match the first packet sent by the
+	client.
+
+	sslh now connects timed out connections to the first
+	configured protocol instead of 'ssh' (just make sure
+	ssh is the first defined protocol).
+
+	sslh now tries protocols in the order in which they
+	are defined (just make sure sslh is the last defined
+	protocol).
+
+v1.11: 21APR2012
+	WARNING: defaults have been removed for --user and
+	--pidfile options, update your start-up scripts!
+
+	No longer stop sslh when reverse DNS requests fail
+	for logging.
+
+	Added HTTP probe.
+
+	No longer create new session if running in
+	foreground.
+
+	No longer default to changing user to 'nobody'. If
+	--user isn't specified, just run as current user.
+
+	No longer create PID file by default, it should be
+	explicitely set with --pidfile.
+
+	No longer log to syslog if in foreground. Logs are
+	instead output to stderr.
+
+	The four changes above make it straightforward to
+	integrate sslh with systemd, and should help with
+	launchd.
+
+v1.10: 27NOV2011
+	Fixed calls referring to sockaddr length so they work
+	with FreeBSD.
+
+	Try target addresses in turn until one works if
+	there are several (e.g. "localhost:22" resolves to
+	an IPv6 address and an IPv4 address and sshd does
+	not listen on IPv6).
+
+	Fixed sslh-fork so killing the head process kills
+	the listener processes.
+
+	Heavily cleaned up test suite. Added stress test
+	t_load script. Added coverage (requires lcov).
+
+	Support for XMPP (Arnaud Gendre).
+
+	Updated README.MacOSX (Aaron Madlon-Kay).
+
+v1.9: 02AUG2011
+	WARNING: This version does not work with FreeBSD and
+	derivatives!
+
+	WARNING: Options changed, you'll need to update your
+	start-up scripts! Log format changed, you'll need to
+	update log processing scripts!
+
+	Now supports IPv6 throughout (both on listening and
+	forwarding)
+
+	Logs now contain IPv6 addresses, local forwarding
+	address, and resolves names (unless --numeric is
+	specified).
+
+	Introduced long options.
+
+	Options -l, -s and -o replaced by their long
+	counterparts.
+
+	Defaults for SSL and SSH options suppressed (it's 
+	legitimate to want to use sslh to mux OpenVPN and 
+	tinc while not caring about SSH nor SSL).
+
+	Bind to multiple addresses with multiple -p options.
+
+	Support for tinc VPN (experimental).
+
+	Numeric logging option.
+
+v1.8: 15JUL2011
+	Changed log format to make it possible to link
+	connections to subsequent logs from other services.
+
+	Updated CentOS init.d script (Andre Krajnik).
+
+	Fixed zombie issue with OpenBSD (The SA_NOCLDWAIT flag is not
+	propagated to the child process, so we set up signals after
+	the fork.) (François FRITZ)
+
+	Added -o "OpenVPN" and OpenVPN probing and support.
+
+	Added single-threaded, select(2)-based version.
+
+	Added support for "Bold" SSH clients (clients that speak first)
+	Thanks to Guillaume Ricaud for spotting a regression
+	bug.
+
+	Added -f "foreground" option.
+
+	Added test suite. (only tests connexions. No test for libwrap,
+	setsid, setuid and so on) and corresponding 'make
+	test' target.
+
+	Added README.MacOSX (thanks Aaron Madlon-Kay)
+
+	Documented use with proxytunnel and corkscrew in
+	README.
+
+	
+v1.7: 01FEB2010
+	Added CentOS init.d script (Andre Krajnik).
+
+	Fixed default ssl address inconsistancy, now
+	defaults to "localhost:443" and fixed documentation
+	accordingly (pointed by Markus Schalke).
+
+	Children no longer bind to the listen socket, so
+	parent server can be stopped without killing an
+	active child (pointed by Matthias Buecher).
+
+	Inetd support (Dima Barsky).
+
+v1.6: 25APR2009
+	Added -V, version option.
+
+	Install target directory configurable in Makefile
+
+	Changed syslog prefix in auth.log to "sslh[%pid]"
+
+	Man page
+
+	new 'make install' and 'make install-debian' targets
+
+	PID file now specified using -P command line option
+
+	Actually fixed zombie generation (the v1.5 patch got
+	lost, doh!)
+
+
+v1.5: 10DEC2008
+	Fixed zombie generation.
+
+	Added support scripts (), Makefile.
+
+	Changed all 'connexions' to 'connections' to please
+	pesky users. Damn users.
+
+v1.4: 13JUL2008
+	Added libwrap support for ssh service (Christian Weinberger)
+	Only SSH is libwraped, not SSL.
+
+v1.3: 14MAY2008
+	Added parsing for local interface to listen on
+
+	Changed default SSL connection to port 442 (443 doesn't make
+	sense as a default as we're already listening on 443)
+
+	Syslog incoming connections
+
+v1.2: 12MAY2008
+	Fixed compilation warning for AMD64 (Thx Daniel Lange)
+
+v1.1: 21MAY2007
+	Making sslhc more like a real daemon:
+	* If $PIDFILE is defined, write first PID to it upon startup
+	* Fork at startup (detach from terminal)
+	(thanks to http://www.enderunix.org/docs/eng/daemon.php -- good checklist)
+	* Less memory usage (?)
+
+v1.0: 
+	Basic functionality: privilege dropping, target hostnames and ports
+	configurable.
+
+

Makefile

@@ -0,0 +1,85 @@
+# Configuration
+
+VERSION="1.15"
+USELIBCONFIG=1	# Use libconfig? (necessary to use configuration files)
+USELIBWRAP=	# Use libwrap?
+COV_TEST= 	# Perform test coverage?
+PREFIX=/usr/local
+
+MAN=sslh.8.gz	# man page name
+
+# End of configuration -- the rest should take care of
+# itself
+
+ifneq ($(strip $(COV_TEST)),)
+    CFLAGS_COV=-fprofile-arcs -ftest-coverage
+endif
+
+CC ?= gcc
+CFLAGS ?=-Wall -g $(CFLAGS_COV)
+
+LIBS=$(LDFLAGS)
+OBJS=common.o sslh-main.o probe.o
+
+ifneq ($(strip $(USELIBWRAP)),)
+	LIBS:=$(LIBS) -lwrap
+	CFLAGS:=$(CFLAGS) -DLIBWRAP
+endif
+
+ifneq ($(strip $(USELIBCONFIG)),)
+	LIBS:=$(LIBS) -lconfig
+	CFLAGS:=$(CFLAGS) -DLIBCONFIG
+endif
+
+all: sslh $(MAN) echosrv
+
+.c.o: *.h
+	$(CC) $(CFLAGS) -D'VERSION=$(VERSION)' -c $<
+
+
+sslh: $(OBJS) sslh-fork sslh-select
+
+sslh-fork: $(OBJS) sslh-fork.o Makefile common.h
+	$(CC) $(CFLAGS) -D'VERSION=$(VERSION)' -o sslh-fork sslh-fork.o $(OBJS) $(LIBS)
+	#strip sslh-fork
+
+sslh-select: $(OBJS) sslh-select.o Makefile common.h 
+	$(CC) $(CFLAGS) -D'VERSION=$(VERSION)' -o sslh-select sslh-select.o $(OBJS) $(LIBS)
+	#strip sslh-select
+
+echosrv: $(OBJS) echosrv.o
+	$(CC) $(CFLAGS) -o echosrv echosrv.o probe.o common.o $(LIBS)
+
+$(MAN): sslh.pod Makefile
+	pod2man --section=8 --release=$(VERSION) --center=" " sslh.pod | gzip -9 - > $(MAN)
+
+# Create release: export clean tree and tag current
+# configuration
+release:
+	git archive master --prefix="sslh-$(VERSION)/" | gzip > /tmp/sslh-$(VERSION).tar.gz
+
+# generic install: install binary and man page
+install: sslh $(MAN)
+	install -D sslh-fork $(PREFIX)/sbin/sslh
+	install -D -m 0644 $(MAN) $(PREFIX)/share/man/man8/$(MAN)
+
+# "extended" install for Debian: install startup script
+install-debian: install sslh $(MAN)
+	sed -e "s+^PREFIX=+PREFIX=$(PREFIX)+" scripts/etc.init.d.sslh > /etc/init.d/sslh
+	chmod 755 /etc/init.d/sslh
+	cp scripts/etc.default.sslh /etc/default/sslh
+	update-rc.d sslh defaults
+
+uninstall:
+	rm -f $(PREFIX)/sbin/sslh $(PREFIX)/share/man/man8/$(MAN) /etc/init.d/sslh /etc/default/sslh
+	update-rc.d sslh remove
+
+clean:
+	rm -f sslh-fork sslh-select echosrv $(MAN) *.o *.gcov *.gcno *.gcda *.png *.html *.css *.info 
+
+tags:
+	ctags --globals -T *.[ch]
+
+test:
+	./t
+

README

@@ -0,0 +1,228 @@
+===== sslh -- A ssl/ssh multiplexer. =====
+
+Sslh accepts connections on specified ports, and forwards
+them further based on tests performed on the first data
+packet sent by the remote client.
+
+Probes for HTTP, SSL, SSH, OpenVPN, tinc, XMPP are
+implemented, and any other protocol that can be tested using
+a regular expression, can be recognised. A typical use case
+is to allow serving several services on port 443 (e.g. to
+connect to ssh from inside a corporate firewall, which
+almost never block port 443) while still serving HTTPS on
+that port. 
+
+Hence sslh acts as a protocol demultiplexer, or a
+switchboard. Its name comes from its original function to
+serve SSH and HTTPS on the same port.
+
+==== Compile and install ====
+
+sslh uses libconfig (http://www.hyperrealm.com/libconfig/)
+and libwrap.
+
+For Debian, these are contained in packages libwrap0-dev and
+libconfig8-dev.  
+
+For OpenSUSE, these are contained in packages libconfig9 and
+libconfig-dev in repository
+http://download.opensuse.org/repositories/multimedia:/libs/openSUSE_12.1/
+
+For Fedora, this package should work:
+https://admin.fedoraproject.org/pkgdb/acls/name/libconfig
+(feedback from Fedorans appreciated).
+
+If you can't find libconfig, or just don't want a
+configuration file, set 'USELIBCONFIG=' in the Makefile.
+
+After this, the Makefile should work:
+
+make install
+
+There are a couple of configuration options at the beginning
+of the Makefile: 
+
+    USELIBWRAP compiles support for host access control (see
+    hosts_access(3)), you will need libwrap headers and
+    library to compile (libwrap0-dev in Debian).
+
+    USELIBCONFIG compiles support for the configuration
+    file. You will need libconfig headers to compile
+    (libconfig8-dev in Debian).
+
+The Makefile produces two different executables: sslh-fork
+and sslh-select. 
+
+sslh-fork forks a new process for each incoming connection.
+It is well-tested and very reliable, but incurs the overhead
+of many processes.  sslh-select uses only one thread, which
+monitors all connections at once. It is more recent and less
+tested, but only incurs a 16 byte overhead per connection.
+Also, if it stops, you'll lose all connections, which means
+you can't upgrade it remotely.
+
+If you are going to use sslh for a "small" setup (less than
+a dozen ssh connections and a low-traffic https server) then
+sslh-fork is probably more suited for you. If you are going
+to use sslh on a "medium" setup (a few thousand ssh
+connections, and another few thousand ssl connections),
+sslh-select will be better. If you have a very large site
+(tens of thousands of connections), you'll need a vapourware
+version that would use libevent or something like that.
+
+
+To install:
+
+make
+cp sslh-fork /usr/local/sbin/sslh
+cp scripts/etc.default.sslh /etc/default/sslh
+
+For Debian:
+cp scripts/etc.init.d.sslh /etc/init.d/sslh
+For CentOS:
+cp scripts/etc.rc.d.init.d.sslh /etc/rc.d/init.d/sslh
+
+and probably create links in /etc/rc<x>.d so that the server
+start automatically at boot-up, e.g. under Debian:
+update-rc.d sslh defaults
+
+
+
+==== Configuration ====
+
+You can edit settings in /etc/default/sslh:
+
+LISTEN=ifname:443
+SSH=localhost:22
+SSL=localhost:443
+
+A good scheme is to use the external name of the machine in
+$LISTEN, and bind httpd to localhost:443 (instead of all
+binding to all interfaces): that way, https connections
+coming from inside your network don't need to go through
+sslh, and sslh is only there as a frontal for connections
+coming from the internet.
+
+Note that 'external name' in this context refers to the
+actual IP address of the machine as seen from your network,
+i.e. that that is not 127.0.0.1 in the output of
+ifconfig(8).
+
+==== Libwrap support ====
+
+Sslh can optionnaly perform libwrap checks for the sshd
+service: because the connection to sshd will be coming
+locally from sslh, sshd cannot determine the IP of the
+client.
+
+==== OpenVPN support ====
+
+OpenVPN clients connecting to OpenVPN running with
+-port-share reportedly take more than one second between
+the time the TCP connexion is established and the time they
+send the first data packet. This results in sslh with
+default settings timing out and assuming an SSH connexion.
+To support OpenVPN connexions reliably, it is necessary to
+increase sslh's timeout to 5 seconds.
+
+Instead of using OpenVPN's port sharing, it is more reliable
+to use sslh's -o option to get sslh to do the port sharing.
+
+==== Using proxytunnel with sslh ====
+
+If you are connecting through a proxy that checks that the
+outgoing connection really is SSL and rejects SSH, you can
+encapsulate all your traffic in SSL using proxytunnel (this
+should work with corkscrew as well). On the server side you
+receive the traffic with stunnel to decapsulate SSL, then
+pipe through sslh to switch HTTP on one side and SSL on the
+other.
+
+In that case, you end up with something like this:
+
+ssh -> proxytunnel -e --------ssh/ssl------> stunnel ---ssh---> sslh --> sshd
+
+Web browser --------http/ssl------> stunnel ---http---> sslh --> http:80
+
+Configuration goes like this:
+
+On the server side, using stunnel3:
+stunnel -f -p mycert.pem  -d thelonious:443 -l /usr/local/sbin/sslh -- sslh -i  --http localhost:80 --ssh localhost:22
+
+stunnel options: -f for foreground/debugging, -p specifies
+the key + certificate, -d specifies which interface and port
+we're listening to for incoming connexions, -l summons sslh
+in inetd mode.
+
+sslh options: -i for inetd mode, --http to forward http
+connexions to port 80, and SSH connexions to port 22.
+
+==== capapbilities support ====
+
+On Linux (only?), you can use POSIX capabilities to reduce a
+server's capabilities to the minimum it needs (see
+capabilities(8).  For sslh, this is CAP_NET_ADMIN (to
+perform transparent proxy-ing) and CAP_NET_BIND_SERVICE (to
+bind to port 443 without being root).
+
+The simplest way to use capabilities is to give them to the
+executable as root:
+
+# setcap cap_net_bind_service,cap_net_admin+pe sslh-select
+
+Then you can run sslh-select as an unpriviledged user, e.g.:
+
+$ sslh-select -p myname:443 --ssh localhost:22 --ssl localhost:443
+
+This has 2 advantages over starting as root with -u:
+- You no longer start as root (duh)
+- This enables transparent proxying.
+
+Caveat: CAP_NET_ADMIN does give sslh too many rights, e.g.
+configuring the interface. If you're not going to use
+transparent proxying, just don't use it.
+
+==== Transparent proxy support ====
+
+On Linux (only?) you can use the --transparent option to
+request transparent proying. This means services behind sslh
+(Apache, sshd and so on) will see the external IP and ports
+as if the external world connected directly to them. This
+simplifies IP-based access control (or makes it possible at
+all).
+
+sslh needs extended rights to perform this: you'll need to
+give it cap_net_admin capabilities (see appropriate chapter)
+or run it as root (but don't do that).
+
+The firewalling tables also need to be adjusted as follow
+(example to connect to https on 4443 -- adapt to your needs
+(I don't think it is possible to have httpd listen to 443 in
+this scheme -- let me know if you manage that))):
+
+# iptables -t mangle -N SSLH
+# iptables -t mangle -A  OUTPUT --protocol tcp --out-interface eth0 --sport 22 --jump SSLH
+# iptables -t mangle -A OUTPUT --protocol tcp --out-interface eth0 --sport 4443 --jump SSLH
+# iptables -t mangle -A SSLH --jump MARK --set-mark 0x1
+# iptables -t mangle -A SSLH --jump ACCEPT
+# ip rule add fwmark 0x1 lookup 100
+# ip route add local 0.0.0.0/0 dev lo table 100
+
+This will only work if sslh does not use any loopback
+addresses (no 127.0.0.1 or localhost), you'll need to use
+explicit IP addresses (or names):
+
+sslh --listen 192.168.0.1:443 --ssh 192.168.0.1:22 --ssl 192.168.0.1:4443
+
+This will not work:
+sslh --listen 192.168.0.1:443 --ssh 127.0.0.1:22 --ssl 127.0.0.1:4443
+
+==== Comments? Questions? ====
+
+You can subscribe to the sslh mailing list here:
+http://rutschle.net/cgi-bin/mailman/listinfo/sslh
+
+This mailing list should be used for discussion, feature
+requests, and will be the prefered channel for
+announcements.
+

README.MacOSX

@@ -0,0 +1,54 @@
+
+sslh is available for Mac OS X via MacPorts. If you have
+MacPorts installed on your system you can install sslh by
+executing the following in the Terminal:
+
+port install sslh
+
+Also, the following is a helpful launchd configuration that
+covers the most common use case of sslh. Save the following
+into a text file, e.g.
+/Library/LaunchDaemons/net.rutschle.sslh.plist, then load it
+with launchctl or simply reboot.
+
+----BEGIN FILE----
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<plist version="1.0">
+<dict>
+	<key>Disabled</key>
+	<false/>
+	<key>KeepAlive</key>
+	<true/>
+	<key>Label</key>
+	<string>net.rutschle.sslh</string>
+	<key>ProgramArguments</key>
+	<array>
+		<string>/opt/local/sbin/sslh</string>
+		<string>-f</string>
+		<string>-v</string>
+		<string>-u</string>
+		<string>nobody</string>
+		<string>-p</string>
+		<string>0.0.0.0:443</string>
+		<string>--ssh</string>
+		<string>localhost:22</string>
+		<string>--ssl</string>
+		<string>localhost:443</string>
+	</array>
+	<key>QueueDirectories</key>
+	<array/>
+	<key>RunAtLoad</key>
+	<true/>
+	<key>StandardErrorPath</key>
+	<string>/Library/Logs/sslh.log</string>
+	<key>StandardOutPath</key>
+	<string>/Library/Logs/sslh.log</string>
+	<key>WatchPaths</key>
+	<array/>
+</dict>
+</plist>
+
+----END FILE----
+
+

basic.cfg

@@ -0,0 +1,28 @@
+# This is a basic configuration file that should provide
+# sensible values for "standard" setup.
+
+verbose: false;
+foreground: false;
+inetd: false;
+numeric: false;
+timeout: 2;
+user: "nobody";
+pidfile: "/var/run/sslh.pid";
+
+
+# Change hostname with your external address name.
+listen:
+(
+    { host: "thelonious"; port: "443"; }
+);
+
+protocols:
+(
+     { name: "ssh"; service: "ssh"; host: "localhost"; port: "22"; probe: "builtin"; },
+     { name: "openvpn"; host: "localhost"; port: "1194"; probe: "builtin"; },
+     { name: "xmpp"; host: "localhost"; port: "5222"; probe: "builtin"; },
+     { name: "http"; host: "localhost"; port: "80"; probe: "builtin"; },
+     { name: "ssl"; host: "localhost"; port: "443"; probe: "builtin"; },
+     { name: "anyprot"; host: "localhost"; port: "443"; probe: "builtin"; }
+);
+

common.c

@@ -0,0 +1,527 @@
+/* Code and variables that is common to both fork and select-based
+ * servers.
+ *
+ * No code here should assume whether sockets are blocking or not.
+ **/
+
+#define _GNU_SOURCE
+#include <stdarg.h>
+
+#include "common.h"
+
+/* Added to make the code compilable under CYGWIN 
+ * */
+#ifndef SA_NOCLDWAIT
+#define SA_NOCLDWAIT 0
+#endif
+
+/* 
+ * Settings that depend on the command line.  They're set in main(), but also
+ * used in other places in common.c, and it'd be heavy-handed to pass it all as
+ * parameters
+ */
+int verbose = 0;
+int probing_timeout = 2;
+int inetd = 0;
+int foreground = 0;
+int background = 0;
+int transparent = 0;
+int numeric = 0;
+const char *user_name, *pid_file;
+
+struct addrinfo *addr_listen = NULL; /* what addresses do we listen to? */
+
+#ifdef LIBWRAP
+#include <tcpd.h>
+int allow_severity =0, deny_severity = 0;
+#endif
+
+
+/* check result and die, printing the offending address and error */
+void check_res_dumpdie(int res, struct addrinfo *addr, char* syscall)
+{
+    char buf[NI_MAXHOST];
+
+    if (res == -1) {
+        fprintf(stderr, "%s:%s: %s\n", 
+                sprintaddr(buf, sizeof(buf), addr), 
+                syscall, 
+                strerror(errno));
+        exit(1);
+    }
+}
+
+/* Starts listening sockets on specified addresses.
+ * IN: addr[], num_addr
+ * OUT: *sockfd[]  pointer to newly-allocated array of file descriptors
+ * Returns number of addresses bound
+ * Bound file descriptors are returned in newly-allocated *sockfd pointer
+   */
+int start_listen_sockets(int *sockfd[], struct addrinfo *addr_list)
+{
+   struct sockaddr_storage *saddr;
+   struct addrinfo *addr;
+   int i, res, reuse;
+   int num_addr = 0;
+
+   for (addr = addr_list; addr; addr = addr->ai_next)
+       num_addr++;
+
+   if (verbose)
+       fprintf(stderr, "listening to %d addresses\n", num_addr);
+
+   *sockfd = malloc(num_addr * sizeof(*sockfd[0]));
+
+   for (i = 0, addr = addr_list; i < num_addr && addr; i++, addr = addr->ai_next) {
+       if (!addr) {
+           fprintf(stderr, "FATAL: Inconsistent listen number. This should not happen.\n");
+           exit(1);
+       }
+       saddr = (struct sockaddr_storage*)addr->ai_addr;
+
+       (*sockfd)[i] = socket(saddr->ss_family, SOCK_STREAM, 0);
+       check_res_dumpdie((*sockfd)[i], addr, "socket");
+
+       reuse = 1;
+       res = setsockopt((*sockfd)[i], SOL_SOCKET, SO_REUSEADDR, (char*)&reuse, sizeof(reuse));
+       check_res_dumpdie(res, addr, "setsockopt");
+
+       res = bind((*sockfd)[i], addr->ai_addr, addr->ai_addrlen);
+       check_res_dumpdie(res, addr, "bind");
+
+       res = listen ((*sockfd)[i], 50);
+       check_res_dumpdie(res, addr, "listen");
+
+   }
+
+   return num_addr;
+}
+
+/* Transparent proxying: bind the peer address of fd to the peer address of
+ * fd_from */
+#define IP_TRANSPARENT 19
+int bind_peer(int fd, int fd_from)
+{
+    struct addrinfo from;
+    struct sockaddr_storage ss;
+    int res, trans = 1;
+
+    memset(&from, 0, sizeof(from));
+    from.ai_addr = (struct sockaddr*)&ss;
+    from.ai_addrlen = sizeof(ss);
+
+    res = getpeername(fd_from, from.ai_addr, &from.ai_addrlen);
+    CHECK_RES_DIE(res, "getpeername");
+    res = setsockopt(fd, IPPROTO_IP, IP_TRANSPARENT, &trans, sizeof(trans));
+    CHECK_RES_DIE(res, "setsockopt");
+    res = bind(fd, from.ai_addr, from.ai_addrlen);
+    CHECK_RES_RETURN(res, "bind");
+
+    return 0;
+}
+
+/* Connect to first address that works and returns a file descriptor, or -1 if
+ * none work. 
+ * If transparent proxying is on, use fd_from peer address on external address
+ * of new file descriptor.
+ * cnx_name points to the name of the service (for logging) */
+int connect_addr(struct addrinfo *addr, int fd_from, const char* cnx_name)
+{
+    struct addrinfo *a;
+    char buf[NI_MAXHOST];
+    int fd, res;
+
+    for (a = addr; a; a = a->ai_next) {
+        if (verbose) 
+            fprintf(stderr, "connecting to %s family %d len %d\n", 
+                    sprintaddr(buf, sizeof(buf), a),
+                    a->ai_addr->sa_family, a->ai_addrlen);
+        fd = socket(a->ai_family, SOCK_STREAM, 0);
+        if (fd == -1) {
+            log_message(LOG_ERR, "forward to %s failed:socket: %s\n", cnx_name, strerror(errno));
+        } else {
+            if (transparent)
+                bind_peer(fd, fd_from);
+            res = connect(fd, a->ai_addr, a->ai_addrlen);
+            if (res == -1) {
+                log_message(LOG_ERR, "forward to %s failed:connect: %s\n", 
+                            cnx_name, strerror(errno));
+            } else {
+                return fd;
+            }
+        }
+    }
+    return -1;
+}
+
+/* Store some data to write to the queue later */
+int defer_write(struct queue *q, void* data, int data_size) 
+{
+    if (verbose) 
+        fprintf(stderr, "**** writing defered on fd %d\n", q->fd);
+    q->defered_data = malloc(data_size);
+    q->begin_defered_data = q->defered_data;
+    q->defered_data_size = data_size;
+    memcpy(q->defered_data, data, data_size);
+
+    return 0;
+}
+
+/* tries to flush some of the data for specified queue
+ * Upon success, the number of bytes written is returned.
+ * Upon failure, -1 returned (e.g. connexion closed)
+ * */
+int flush_defered(struct queue *q)
+{
+    int n;
+
+    if (verbose)
+        fprintf(stderr, "flushing defered data to fd %d\n", q->fd);
+
+    n = write(q->fd, q->defered_data, q->defered_data_size);
+    if (n == -1)
+        return n;
+
+    if (n == q->defered_data_size) {
+        /* All has been written -- release the memory */
+        free(q->begin_defered_data);
+        q->begin_defered_data = NULL;
+        q->defered_data = NULL;
+        q->defered_data_size = 0;
+    } else {
+        /* There is data left */
+        q->defered_data += n;
+        q->defered_data_size -= n;
+    }
+
+    return n;
+}
+
+
+void init_cnx(struct connection *cnx)
+{
+    memset(cnx, 0, sizeof(*cnx));
+    cnx->q[0].fd = -1;
+    cnx->q[1].fd = -1;
+}
+
+void dump_connection(struct connection *cnx)
+{
+    printf("state: %d\n", cnx->state);
+    printf("fd %d, %d defered\n", cnx->q[0].fd, cnx->q[0].defered_data_size);
+    printf("fd %d, %d defered\n", cnx->q[1].fd, cnx->q[1].defered_data_size);
+}
+
+
+/* 
+ * moves data from one fd to other
+ *
+ * retuns number of bytes copied if success
+ * returns 0 (FD_CNXCLOSED) if incoming socket closed
+ * returns FD_NODATA if no data was available
+ * returns FD_STALLED if data was read, could not be written, and has been
+ * stored in temporary buffer.
+ */
+int fd2fd(struct queue *target_q, struct queue *from_q)
+{
+   char buffer[BUFSIZ];
+   int target, from, size_r, size_w;
+
+   target = target_q->fd;
+   from = from_q->fd;
+
+   size_r = read(from, buffer, sizeof(buffer));
+   if (size_r == -1) {
+       switch (errno) {
+       case EAGAIN:
+           if (verbose)
+               fprintf(stderr, "reading 0 from %d\n", from);
+           return FD_NODATA;
+
+       case ECONNRESET:
+       case EPIPE:
+           return FD_CNXCLOSED;
+       }
+   }
+
+   CHECK_RES_RETURN(size_r, "read");
+
+   if (size_r == 0)
+      return FD_CNXCLOSED;
+
+   size_w = write(target, buffer, size_r);
+   /* process -1 when we know how to deal with it */
+   if ((size_w == -1)) {
+       switch (errno) {
+       case EAGAIN:
+           /* write blocked: Defer data */
+           defer_write(target_q, buffer, size_r);
+           return FD_STALLED;
+
+       case ECONNRESET:
+       case EPIPE:
+           /* remove end closed -- drop the connection */
+           return FD_CNXCLOSED;
+       }
+   } else if (size_w < size_r) {
+       /* incomplete write -- defer the rest of the data */
+       defer_write(target_q, buffer + size_w, size_r - size_w);
+       return FD_STALLED;
+   }
+
+   CHECK_RES_RETURN(size_w, "write");
+
+   return size_w;
+}
+
+/* returns a string that prints the IP and port of the sockaddr */
+char* sprintaddr(char* buf, size_t size, struct addrinfo *a)
+{
+   char host[NI_MAXHOST], serv[NI_MAXSERV];
+   int res;
+
+   res = getnameinfo(a->ai_addr, a->ai_addrlen,
+               host, sizeof(host), 
+               serv, sizeof(serv), 
+               numeric ? NI_NUMERICHOST | NI_NUMERICSERV : 0 );
+
+   if (res) {
+       log_message(LOG_ERR, "sprintaddr:getnameinfo: %s\n", gai_strerror(res));
+       /* Name resolution failed: do it numerically instead */
+       res = getnameinfo(a->ai_addr, a->ai_addrlen,
+                         host, sizeof(host), 
+                         serv, sizeof(serv), 
+                         NI_NUMERICHOST | NI_NUMERICSERV);
+       /* should not fail but... */
+       if (res) {
+           log_message(LOG_ERR, "sprintaddr:getnameinfo(NUM): %s\n", gai_strerror(res));
+           strcpy(host, "?");
+           strcpy(serv, "?");
+       }
+   }
+
+   snprintf(buf, size, "%s:%s", host, serv);
+
+   return buf;
+}
+
+/* Turns a hostname and port (or service) into a list of struct addrinfo 
+ * returns 0 on success, -1 otherwise and logs error
+ **/
+int resolve_split_name(struct addrinfo **out, const char* host, const char* serv)
+{
+   struct addrinfo hint;
+   int res;
+
+   memset(&hint, 0, sizeof(hint));
+   hint.ai_family = PF_UNSPEC;
+   hint.ai_socktype = SOCK_STREAM;
+
+   res = getaddrinfo(host, serv, &hint, out);
+   if (res)
+      log_message(LOG_ERR, "%s `%s:%s'\n", gai_strerror(res), host, serv);
+   return res;
+}
+
+/* turns a "hostname:port" string into a list of struct addrinfo;
+out: list of newly allocated addrinfo (see getaddrinfo(3)); freeaddrinfo(3) when done
+fullname: input string -- it gets clobbered
+*/
+void resolve_name(struct addrinfo **out, char* fullname)
+{
+   char *serv, *host;
+   int res;
+
+   char *sep = strrchr(fullname, ':');
+
+   if (!sep) /* No separator: parameter is just a port */
+   {
+      fprintf(stderr, "%s: names must be fully specified as hostname:port\n", fullname);
+      exit(1);
+   }
+
+   host = fullname;
+   serv = sep+1;
+   *sep = 0;
+
+   res = resolve_split_name(out, host, serv);
+   if (res) {
+      fprintf(stderr, "%s `%s'\n", gai_strerror(res), fullname);
+      if (res == EAI_SERVICE)
+         fprintf(stderr, "(Check you have specified all ports)\n");
+      exit(4);
+   }
+}
+
+/* Log to syslog or stderr if foreground */
+void log_message(int type, char* msg, ...)
+{
+    va_list ap;
+
+    va_start(ap, msg);
+    if (foreground)
+        vfprintf(stderr, msg, ap);
+    else
+        vsyslog(type, msg, ap);
+    va_end(ap);
+}
+
+/* syslogs who connected to where */
+void log_connection(struct connection *cnx)
+{
+    struct addrinfo addr;
+    struct sockaddr_storage ss;
+#define MAX_NAMELENGTH (NI_MAXHOST + NI_MAXSERV + 1)
+    char peer[MAX_NAMELENGTH], service[MAX_NAMELENGTH],
+        local[MAX_NAMELENGTH], target[MAX_NAMELENGTH];
+    int res;
+
+    addr.ai_addr = (struct sockaddr*)&ss;
+    addr.ai_addrlen = sizeof(ss);
+
+    res = getpeername(cnx->q[0].fd, addr.ai_addr, &addr.ai_addrlen);
+    if (res == -1) return; /* that should never happen, right? */
+    sprintaddr(peer, sizeof(peer), &addr);
+
+    addr.ai_addrlen = sizeof(ss);
+    res = getsockname(cnx->q[0].fd, addr.ai_addr, &addr.ai_addrlen);
+    if (res == -1) return;
+    sprintaddr(service, sizeof(service), &addr);
+
+    addr.ai_addrlen = sizeof(ss);
+    res = getpeername(cnx->q[1].fd, addr.ai_addr, &addr.ai_addrlen);
+    if (res == -1) return;
+    sprintaddr(target, sizeof(target), &addr);
+
+    addr.ai_addrlen = sizeof(ss);
+    res = getsockname(cnx->q[1].fd, addr.ai_addr, &addr.ai_addrlen);
+    if (res == -1) return;
+    sprintaddr(local, sizeof(local), &addr);
+
+    log_message(LOG_INFO, "connection from %s to %s forwarded from %s to %s\n",
+                peer,
+                service,
+                local,
+                target);
+}
+
+
+/* libwrap (tcpd): check the connection is legal. This is necessary because
+ * the actual server will only see a connection coming from localhost and can't
+ * apply the rules itself.
+ *
+ * Returns -1 if access is denied, 0 otherwise
+ */
+int check_access_rights(int in_socket, const char* service)
+{
+#ifdef LIBWRAP
+    struct sockaddr peeraddr;
+    socklen_t size = sizeof(peeraddr);
+    char addr_str[NI_MAXHOST], host[NI_MAXHOST];
+    int res;
+
+    res = getpeername(in_socket, &peeraddr, &size);
+    CHECK_RES_DIE(res, "getpeername");
+
+    /* extract peer address */
+    res = getnameinfo(&peeraddr, size, addr_str, sizeof(addr_str), NULL, 0, NI_NUMERICHOST);
+    if (res) {
+        if (verbose)
+            fprintf(stderr, "getnameinfo(NI_NUMERICHOST):%s\n", gai_strerror(res));
+        strcpy(addr_str, STRING_UNKNOWN);
+    }
+    /* extract peer name */
+    strcpy(host, STRING_UNKNOWN);
+    if (!numeric) {
+        res = getnameinfo(&peeraddr, size, host, sizeof(host), NULL, 0, NI_NAMEREQD);
+        if (res) {
+            if (verbose)
+                fprintf(stderr, "getnameinfo(NI_NAMEREQD):%s\n", gai_strerror(res));
+        }
+    }
+
+    if (!hosts_ctl(service, host, addr_str, STRING_UNKNOWN)) {
+        if (verbose)
+            fprintf(stderr, "access denied\n");
+        log_message(LOG_INFO, "connection from %s(%s): access denied", host, addr_str);
+        close(in_socket);
+        return -1;
+    }
+#endif
+    return 0;
+}
+
+void setup_signals(void)
+{
+    int res;
+    struct sigaction action;
+
+    /* Request no SIGCHLD is sent upon termination of
+     * the children */
+    memset(&action, 0, sizeof(action));
+    action.sa_handler = NULL;
+    action.sa_flags = SA_NOCLDWAIT;
+    res = sigaction(SIGCHLD, &action, NULL);
+    CHECK_RES_DIE(res, "sigaction");
+
+    /* Set SIGTERM to exit. For some reason if it's not set explicitely,
+     * coverage information is lost when killing the process */
+    memset(&action, 0, sizeof(action));
+    action.sa_handler = exit;
+    res = sigaction(SIGTERM, &action, NULL);
+    CHECK_RES_DIE(res, "sigaction");
+
+    /* Ignore SIGPIPE . */
+    action.sa_handler = SIG_IGN;
+    res = sigaction(SIGPIPE, &action, NULL);
+    CHECK_RES_DIE(res, "sigaction");
+
+}
+
+/* Open syslog connection with appropriate banner; 
+ * banner is made up of basename(bin_name)+"[pid]" */
+void setup_syslog(const char* bin_name) {
+    char *name1, *name2;
+
+    name1 = strdup(bin_name);
+    asprintf(&name2, "%s[%d]", basename(name1), getpid());
+    openlog(name2, LOG_CONS, LOG_AUTH);
+    free(name1); 
+    /* Don't free name2, as openlog(3) uses it (at least in glibc) */
+
+    log_message(LOG_INFO, "%s %s started\n", server_type, VERSION);
+}
+
+/* We don't want to run as root -- drop priviledges if required */
+void drop_privileges(const char* user_name)
+{
+    int res;
+    struct passwd *pw = getpwnam(user_name);
+    if (!pw) {
+        fprintf(stderr, "%s: not found\n", user_name);
+        exit(2);
+    }
+    if (verbose)
+        fprintf(stderr, "turning into %s\n", user_name);
+
+    res = setgid(pw->pw_gid);
+    CHECK_RES_DIE(res, "setgid");
+    setuid(pw->pw_uid);
+    CHECK_RES_DIE(res, "setuid");
+}
+
+/* Writes my PID */
+void write_pid_file(const char* pidfile)
+{
+    FILE *f;
+
+    f = fopen(pidfile, "w");
+    if (!f) {
+        perror(pidfile);
+        exit(3);
+    }
+
+    fprintf(f, "%d\n", getpid());
+    fclose(f);
+}
+

common.h

@@ -0,0 +1,122 @@
+#ifndef __COMMON_H_
+#define __COMMON_H_
+
+/* FD_SETSIZE is 64 on Cygwin, which is really low. Just redefining it is
+ * enough for the macros to adapt (http://support.microsoft.com/kb/111855)
+ */
+#ifdef __CYGWIN__
+#define FD_SETSIZE 4096
+#endif
+
+#define _GNU_SOURCE
+#include <sys/types.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <signal.h>
+#include <sys/socket.h>
+#include <sys/wait.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <netdb.h>
+#include <pwd.h>
+#include <syslog.h>
+#include <libgen.h>
+#include <time.h>
+#include <getopt.h>
+
+#ifndef VERSION
+#define VERSION "v?"
+#endif
+
+#define CHECK_RES_DIE(res, str) \
+    if (res == -1) {    \
+       perror(str);     \
+       exit(1);         \
+    }
+
+#define CHECK_RES_RETURN(res, str) \
+    if (res == -1) {                                    \
+        log_message(LOG_CRIT, "%s:%d:%s\n", str, errno, strerror(errno));  \
+        return res;                                     \
+    } 
+
+#define ARRAY_SIZE(a) (sizeof(a) / sizeof(a[0]))
+
+#if 1
+#define TRACE fprintf(stderr, "%s:%d\n", __FILE__, __LINE__);
+#else
+#define TRACE
+#endif
+
+enum connection_state {
+    ST_PROBING=1,    /* Waiting for timeout to find where to forward */
+    ST_SHOVELING   /* Connexion is established */
+};
+
+/* this is used to pass protocols through the command-line parameter parsing */
+#define PROT_SHIFT 1000  /* protocol options will be 1000, 1001, etc */
+
+/* A 'queue' is composed of a file descriptor (which can be read from or
+ * written to), and a queue for defered write data */
+struct queue {
+    int fd;
+    void *begin_defered_data;
+    void *defered_data;
+    int defered_data_size;
+};
+
+struct connection {
+    enum connection_state state;
+    time_t probe_timeout;
+
+    /* q[0]: queue for external connection (client);
+     * q[1]: queue for internal connection (httpd or sshd);
+     * */
+    struct queue q[2];
+};
+
+#define FD_CNXCLOSED    0
+#define FD_NODATA       -1
+#define FD_STALLED      -2
+
+
+/* common.c */
+void init_cnx(struct connection *cnx);
+int connect_addr(struct addrinfo *addr, int fd_from, const char* cnx_name);
+int fd2fd(struct queue *target, struct queue *from);
+char* sprintaddr(char* buf, size_t size, struct addrinfo *a);
+void resolve_name(struct addrinfo **out, char* fullname);
+struct proto* probe_client_protocol(struct connection *cnx);
+void log_connection(struct connection *cnx);
+int check_access_rights(int in_socket, const char* service);
+void setup_signals(void);
+void setup_syslog(const char* bin_name);
+void drop_privileges(const char* user_name);
+void write_pid_file(const char* pidfile);
+void log_message(int type, char* msg, ...);
+void dump_connection(struct connection *cnx);
+int resolve_split_name(struct addrinfo **out, const char* hostname, const char* port);
+
+int start_listen_sockets(int *sockfd[], struct addrinfo *addr_list);
+
+int defer_write(struct queue *q, void* data, int data_size);
+int flush_defered(struct queue *q);
+
+extern int probing_timeout, verbose, inetd, foreground, 
+       background, transparent, numeric;
+extern struct sockaddr_storage addr_ssl, addr_ssh, addr_openvpn;
+extern struct addrinfo *addr_listen;
+extern const char* USAGE_STRING;
+extern const char* user_name, *pid_file;
+extern const char* server_type;
+
+/* sslh-fork.c */
+void start_shoveler(int);
+
+void main_loop(int *listen_sockets, int num_addr_listen);
+
+#endif

echosrv.c

@@ -0,0 +1,160 @@
+/* echosrv: a simple line echo server with optional prefix adding.
+ *
+ * echsrv --listen localhost6:1234 --prefix "ssl: "
+ *
+ * This will bind to 1234, and echo every line pre-pending "ssl: ". This is
+ * used for testing: we create several such servers with different prefixes,
+ * then we connect test clients that can then check they get the proper data
+ * back (thus testing that shoveling works both ways) with the correct prefix
+ * (thus testing it connected to the expected service).
+ * **/
+
+#define _GNU_SOURCE
+#include <sys/types.h>
+#include <fcntl.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <signal.h>
+#include <sys/socket.h>
+#include <sys/wait.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <netdb.h>
+#include <pwd.h>
+#include <syslog.h>
+#include <libgen.h>
+#include <getopt.h>
+
+#include "common.h"
+
+/* Added to make the code compilable under CYGWIN 
+ * */
+#ifndef SA_NOCLDWAIT
+#define SA_NOCLDWAIT 0
+#endif
+
+const char* USAGE_STRING =
+"echosrv\n" \
+"usage:\n" \
+"\techosrv  [-v] --listen <address:port> [--prefix <prefix>]\n"
+"-v: verbose\n" \
+"--listen: address to listen on. Can be specified multiple times.\n" \
+"--prefix: add specified prefix before every line echoed.\n"
+"";
+
+const char* server_type = "echsrv"; /* keep setup_syslog happy */
+
+/* 
+ * Settings that depend on the command line. 
+ */
+char* prefix = "";
+int port;
+
+void parse_cmdline(int argc, char* argv[])
+{
+    int c;
+    struct option options[] = {
+        { "verbose",    no_argument,            &verbose,       1 },
+        { "numeric",    no_argument,            &numeric,       1 },
+        { "listen",     required_argument,      0,              'l' },
+        { "prefix",     required_argument,      0,              'p' },
+    };
+    struct addrinfo **a;
+
+    while ((c = getopt_long_only(argc, argv, "l:p:", options, NULL)) != -1) {
+        if (c == 0) continue;
+
+        switch (c) {
+
+        case 'l':
+            /* find the end of the listen list */
+            for (a = &addr_listen; *a; a = &((*a)->ai_next));
+            /* append the specified addresses */
+            resolve_name(a, optarg);
+            break;
+
+        case 'p':
+            prefix = optarg;
+            break;
+
+        default:
+            fprintf(stderr, "%s", USAGE_STRING);
+            exit(2);
+        }
+    }
+
+    if (!addr_listen) {
+        fprintf(stderr, "No listening port specified\n");
+        exit(1);
+    }
+}
+
+void start_echo(int fd)
+{
+    int res;
+    char buffer[1 << 20];
+    int ret, prefix_len;
+
+    prefix_len = strlen(prefix);
+
+    memset(buffer, 0, sizeof(buffer));
+    strcpy(buffer, prefix);
+
+    while (1) {
+        ret = read(fd, buffer + prefix_len, sizeof(buffer));
+        if (ret == -1) {
+            fprintf(stderr, "%s", strerror(errno));
+            return;
+        }
+        res = write(fd, buffer, ret + prefix_len);
+        if (res < 0) {
+            fprintf(stderr, "%s", strerror(errno));
+            return;
+        }
+    }
+}
+
+void main_loop(int listen_sockets[], int num_addr_listen)
+{
+    int in_socket, i;
+
+    for (i = 0; i < num_addr_listen; i++) {
+        if (!fork()) {
+            while (1)
+            {
+                in_socket = accept(listen_sockets[i], 0, 0);
+                if (verbose) fprintf(stderr, "accepted fd %d\n", in_socket);
+
+                if (!fork())
+                {
+                    close(listen_sockets[i]);
+                    start_echo(in_socket);
+                    exit(0);
+                }
+                close(in_socket);
+            }
+        }
+    }
+    wait(NULL);
+}
+
+int main(int argc, char *argv[])
+{
+
+   extern char *optarg;
+   extern int optind;
+   int num_addr_listen;
+
+   int *listen_sockets;
+
+   parse_cmdline(argc, argv);
+
+   num_addr_listen = start_listen_sockets(&listen_sockets, addr_listen);
+
+   main_loop(listen_sockets, num_addr_listen);
+
+   return 0;
+}

example.cfg

@@ -0,0 +1,52 @@
+# This file is provided as documentation to show what is
+# possible. It should not be used as-is, and probably should
+# not be used as a starting point for a working
+# configuration. Instead use basic.cfg.
+
+verbose: true;
+foreground: true;
+inetd: false;
+numeric: false;
+timeout: 2;
+user: "nobody";
+pidfile: "/var/run/sslh.pid";
+
+
+# List of interfaces on which we should listen
+listen:
+(
+    { host: "thelonious"; port: "443"; },
+    { host: "thelonious"; port: "8080"; }
+);
+
+# List of protocols
+#
+# Each protocol entry consists of:
+#   name: name of the protocol
+#   service: (optional) libwrap service name (see hosts_access(5))
+#   host: host name to connect that protocol
+#   port: port number to connect that protocol
+#   probe: "builtin" or a list of regular expressions
+#          (can be left out, e.g. to use with on-timeout)
+#   
+# sslh will try each probe in order they are declared, and
+# connect to the first that matches.
+
+protocols:
+(
+     { name: "ssh"; service: "ssh"; host: "localhost"; port: "22"; probe: "builtin"; },
+     { name: "openvpn"; host: "localhost"; port: "1194"; probe: [ "^\x00[\x0D-\xFF]$", "^\x00[\x0D-\xFF]\x38" ]; },
+     { name: "xmpp"; host: "localhost"; port: "5222"; probe: [ "jabber" ]; },
+     { name: "http"; host: "localhost"; port: "80"; probe: "builtin"; },
+     { name: "ssl"; host: "localhost"; port: "443"; probe: [ "" ]; },
+     { name: "timeout"; service: "daytime"; host: "localhost"; port: "daytime"; }
+);
+
+# Optionally, specify to which protocol to connect in case
+# of timeout (defaults to "ssh").
+# You can timeout to any arbitrary address by setting a
+# protocol with no probe, as is the case with this example.
+# This enables you to set a tcpd service name for this
+# protocol too.
+on-timeout: "timeout";
+

probe.c

@@ -0,0 +1,288 @@
+/*
+# probe.c: Code for probing protocols
+#
+# Copyright (C) 2007-2012  Yves Rutschle
+# 
+# This program is free software; you can redistribute it
+# and/or modify it under the terms of the GNU General Public
+# License as published by the Free Software Foundation; either
+# version 2 of the License, or (at your option) any later
+# version.
+# 
+# This program is distributed in the hope that it will be
+# useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+# PURPOSE.  See the GNU General Public License for more
+# details.
+# 
+# The full text for the General Public License is here:
+# http://www.gnu.org/licenses/gpl.html
+*/
+
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <regex.h>
+#include <ctype.h>
+#include "probe.h"
+
+
+
+static int is_ssh_protocol(const char *p, int len, struct proto*);
+static int is_openvpn_protocol(const char *p, int len, struct proto*);
+static int is_tinc_protocol(const char *p, int len, struct proto*);
+static int is_xmpp_protocol(const char *p, int len, struct proto*);
+static int is_http_protocol(const char *p, int len, struct proto*);
+static int is_tls_protocol(const char *p, int len, struct proto*);
+static int is_true(const char *p, int len, struct proto* proto) { return 1; }
+
+/* Table of protocols that have a built-in probe
+ */
+static struct proto builtins[] = {
+    /* description   service  saddr   probe  */
+    { "ssh",         "sshd",   NULL,   is_ssh_protocol},
+    { "openvpn",     NULL,     NULL,   is_openvpn_protocol },
+    { "tinc",        NULL,     NULL,   is_tinc_protocol },
+    { "xmpp",        NULL,     NULL,   is_xmpp_protocol },
+    { "http",        NULL,     NULL,   is_http_protocol },
+    { "ssl",         NULL,     NULL,   is_tls_protocol },
+    { "tls",         NULL,     NULL,   is_tls_protocol },
+    { "anyprot",     NULL,     NULL,   is_true }
+};
+
+static struct proto *protocols;
+static char* on_timeout = "ssh";
+
+struct proto*  get_builtins(void) {
+    return builtins;
+}
+
+int get_num_builtins(void) {
+    return ARRAY_SIZE(builtins);
+}
+
+/* Sets the protocol name to connect to in case of timeout */
+void set_ontimeout(const char* name)
+{
+    asprintf(&on_timeout, "%s", name);
+}
+
+/* Returns the protocol to connect to in case of timeout; 
+ * if not found, return the first protocol specified 
+ */
+struct proto* timeout_protocol(void) 
+{
+    struct proto* p = get_first_protocol();
+    for (; p && strcmp(p->description, on_timeout); p = p->next);
+    if (p) return p;
+    return get_first_protocol();
+}
+
+/* returns the first protocol (caller can then follow the *next pointers) */
+struct proto* get_first_protocol(void)
+{
+    return protocols;
+}
+
+void set_protocol_list(struct proto* prots)
+{
+    protocols = prots;
+}
+
+/* From http://grapsus.net/blog/post/Hexadecimal-dump-in-C */
+#define HEXDUMP_COLS 16
+void hexdump(const char *mem, unsigned int len)
+{
+    unsigned int i, j;
+
+    for(i = 0; i < len + ((len % HEXDUMP_COLS) ? (HEXDUMP_COLS - len % HEXDUMP_COLS) : 0); i++)
+    {
+        /* print offset */
+        if(i % HEXDUMP_COLS == 0)
+            printf("0x%06x: ", i);
+
+        /* print hex data */
+        if(i < len)
+            printf("%02x ", 0xFF & mem[i]);
+        else /* end of block, just aligning for ASCII dump */
+            printf("   ");
+
+        /* print ASCII dump */
+        if(i % HEXDUMP_COLS == (HEXDUMP_COLS - 1)) {
+            for(j = i - (HEXDUMP_COLS - 1); j <= i; j++) {
+                if(j >= len) /* end of block, not really printing */
+                    putchar(' ');
+                else if(isprint(mem[j])) /* printable char */
+                    putchar(0xFF & mem[j]);        
+                else /* other char */
+                    putchar('.');
+            }
+            putchar('\n');
+        }
+    }
+}
+
+/* Is the buffer the beginning of an SSH connection? */
+static int is_ssh_protocol(const char *p, int len, struct proto *proto)
+{
+    if (!strncmp(p, "SSH-", 4)) {
+        return 1;
+    }
+    return 0;
+}
+
+/* Is the buffer the beginning of an OpenVPN connection?
+ *
+ * Code inspired from OpenVPN port-share option; however, OpenVPN code is
+ * wrong: users using pre-shared secrets have non-initialised key_id fields so
+ * p[3] & 7 should not be looked at, and also the key_method can be specified
+ * to 1 which changes the opcode to P_CONTROL_HARD_RESET_CLIENT_V1.
+ * See:
+ * http://www.fengnet.com/book/vpns%20illustrated%20tunnels%20%20vpnsand%20ipsec/ch08lev1sec5.html
+ * and OpenVPN ssl.c, ssl.h and options.c
+ */
+static int is_openvpn_protocol (const char*p,int len, struct proto *proto)
+{
+    int packet_len = ntohs(*(uint16_t*)p);
+
+    return packet_len == len - 2;
+}
+
+/* Is the buffer the beginning of a tinc connections?
+ * (protocol is undocumented, but starts with "0 " in 1.0.15)
+ * */
+static int is_tinc_protocol( const char *p, int len, struct proto *proto)
+{
+    return !strncmp(p, "0 ", 2);
+}
+
+/* Is the buffer the beginning of a jabber (XMPP) connections?
+ * (Protocol is documented (http://tools.ietf.org/html/rfc6120) but for lazy
+ * clients, just checking first frame containing "jabber" in xml entity)
+ * */
+static int is_xmpp_protocol( const char *p, int len, struct proto *proto)
+{
+    return strstr(p, "jabber") ? 1 : 0;
+}
+
+static int probe_http_method(const char *p, const char *opt)
+{
+    return !strcmp(p, opt);
+}
+
+/* Is the buffer the beginning of an HTTP connection?  */
+static int is_http_protocol(const char *p, int len, struct proto *proto)
+{
+    /* If it's got HTTP in the request (HTTP/1.1) then it's HTTP */
+    if (strstr(p, "HTTP"))
+        return 1;
+
+    /* Otherwise it could be HTTP/1.0 without version: check if it's got an
+     * HTTP method (RFC2616 5.1.1) */
+    probe_http_method(p, "OPTIONS");
+    probe_http_method(p, "GET");
+    probe_http_method(p, "HEAD");
+    probe_http_method(p, "POST");
+    probe_http_method(p, "PUT");
+    probe_http_method(p, "DELETE");
+    probe_http_method(p, "TRACE");
+    probe_http_method(p, "CONNECT");
+
+    return 0;
+}
+
+static int is_tls_protocol(const char *p, int len, struct proto *proto)
+{
+    /* TLS packet starts with a record "Hello" (0x16), followed by version
+     * (0x03 0x00-0x03) (RFC6101 A.1)
+     * This means we reject SSLv2 and lower, which is actually a good thing (RFC6176)
+     */
+    return p[0] == 0x16 && p[1] == 0x03 && ( p[2] >= 0 && p[2] <= 0x03);
+}
+
+static int regex_probe(const char *p, int len, struct proto *proto)
+{
+    regex_t** probe_list = (regex_t**)(proto->data);
+    int i=0;
+
+    while (probe_list[i]) {
+        if (!regexec(probe_list[i], p, 0, NULL, 0)) {
+            return 1;
+        }
+        i++;
+    }
+    return 0;
+}
+
+/* 
+ * Read the beginning of data coming from the client connection and check if
+ * it's a known protocol. Then leave the data on the defered
+ * write buffer of the connection and returns a pointer to the protocol
+ * structure
+ */
+struct proto* probe_client_protocol(struct connection *cnx)
+{
+    char buffer[BUFSIZ];
+    struct proto *p;
+    int n;
+
+    n = read(cnx->q[0].fd, buffer, sizeof(buffer));
+    /* It's possible that read() returns an error, e.g. if the client
+     * disconnected between the previous call to select() and now. If that
+     * happens, we just connect to the default protocol so the caller of this
+     * function does not have to deal with a specific  failure condition (the
+     * connection will just fail later normally). */
+    if (n > 0) {
+        defer_write(&cnx->q[1], buffer, n);
+
+        for (p = protocols; p; p = p->next) {
+            if (! p->probe) continue;
+            if (verbose) fprintf(stderr, "probing for %s\n", p->description);
+            if (p->probe(buffer, n, p)) {
+                if (verbose) fprintf(stderr, "probe %s successful\n", p->description);
+                return p;
+            }
+        }
+    }
+
+    if (verbose) 
+        fprintf(stderr, 
+                "all probes failed, connecting to first protocol: %s\n", 
+                protocols->description);
+
+    /* If none worked, return the first one affected (that's completely
+     * arbitrary) */
+    return protocols;
+}
+
+/* Returns the structure for specified protocol or NULL if not found */
+static struct proto* get_protocol(const char* description)
+{
+    int i;
+
+    for (i = 0; i < ARRAY_SIZE(builtins); i++) {
+        if (!strcmp(builtins[i].description, description)) {
+            return &builtins[i];
+        }
+    }
+    return NULL;
+}
+
+/* Returns the probe for specified protocol:
+ * parameter is the description in builtins[], or "regex" 
+ * */
+T_PROBE* get_probe(const char* description) {
+    struct proto* p = get_protocol(description);
+
+    if (p)
+        return p->probe;
+
+    /* Special case of "regex" probe (we don't want to set it in builtins
+     * because builtins is also used to build the command-line options and
+     * regexp is not legal on the command line)*/
+    if (!strcmp(description, "regex"))
+        return regex_probe;
+
+    return NULL;
+}
+
+

probe.h

@@ -0,0 +1,59 @@
+/* API for probe.c */
+
+#ifndef __PROBE_H_
+#define __PROBE_H_
+
+#include "common.h"
+
+struct proto;
+typedef int T_PROBE(const char*, int, struct proto*);
+
+/* For each protocol we need: */
+struct proto {
+    const char* description;  /* a string that says what it is (for logging and command-line parsing) */
+    const char* service;      /* service name to do libwrap checks */
+    struct addrinfo *saddr; /* list of addresses to try and switch that protocol */
+
+    /* function to probe that protocol; parameters are buffer and length
+     * containing the data to probe, and a pointer to the protocol structure */
+    T_PROBE* probe;
+    void* data;     /* opaque pointer ; used to pass list of regex to regex probe */
+    struct proto *next; /* pointer to next protocol in list, NULL if last */
+};
+
+/* Returns a pointer to the array of builtin protocols */
+struct proto * get_builtins(void);
+
+/* Returns the number of builtin protocols */
+int get_num_builtins(void);
+
+/* Returns the probe for specified protocol */
+T_PROBE* get_probe(const char* description);
+
+/* Returns the head of the configured protocols */
+struct proto* get_first_protocol(void);
+
+/* Set the list of configured protocols */
+void set_protocol_list(struct proto*);
+
+/* probe_client_protocol
+ *
+ * Read the beginning of data coming from the client connection and check if
+ * it's a known protocol. Then leave the data on the defered
+ * write buffer of the connection and returns a pointer to the protocol
+ * structure
+ */
+struct proto* probe_client_protocol(struct connection *cnx);
+
+/* set the protocol to connect to in case of timeout */
+void set_ontimeout(const char* name);
+
+/* timeout_protocol
+ *
+ * Returns the protocol to connect to in case of timeout
+ */
+struct proto* timeout_protocol(void);
+
+void hexdump(const char*, unsigned int);
+
+#endif

scripts/etc.default.sslh

@@ -0,0 +1,5 @@
+LISTEN=ifname:443
+SSH=localhost:22
+SSL=localhost:443
+USER=nobody
+PID=/var/run/sslh.pid

scripts/etc.init.d.sslh

@@ -0,0 +1,59 @@
+#! /bin/sh
+
+### BEGIN INIT INFO
+# Provides:		sslh
+# Required-Start:    $remote_fs $syslog
+# Required-Stop:     $remote_fs $syslog
+# Default-Start:	2 3 4 5
+# Default-Stop:		1
+# Short-Description:	sslh proxy ssl & ssh connections
+### END INIT INFO
+
+set -e
+tag=sslh
+facility=user.info
+
+# /etc/init.d/sslh: start and stop the sslh proxy daemon
+
+if test -f /etc/default/sslh; then
+    . /etc/default/sslh
+fi
+
+# The prefix is normally filled by make install. If
+# installing by hand, fill it in yourself!
+PREFIX=
+DAEMON=$PREFIX/sbin/sslh 
+
+start()
+{
+        echo "Start services: sslh"
+        $DAEMON --user ${USER} --pidfile ${PID} --listen ${LISTEN} --ssh ${SSH} --ssl ${SSL}
+        logger -t ${tag} -p ${facility} -i 'Started sslh'
+}
+
+stop()
+{
+        echo "Stop services: sslh"
+	killall $DAEMON
+      	logger -t ${tag} -p ${facility} -i 'Stopped sslh'
+}
+
+
+case "$1" in
+	  start)
+		    start
+		    ;;
+	  stop)
+		    stop
+		    ;;
+    restart)
+		    stop
+		    sleep 5
+		    start
+		    ;;
+	  *)
+		    echo "Usage: /etc/init.d/sslh {start|stop|restart}" >&2
+		    ;;
+esac
+
+exit 0

scripts/etc.rc.d.init.d.sslh.centos

@@ -0,0 +1,76 @@
+#!/bin/bash
+#
+#       /etc/rc.d/init.d/sslh
+# sslh          This shell script takes care of starting and stopping
+#               sslh - a daemon switching incoming connection between SSH and SSL/HTTPS servers
+#
+# Author: Andre Krajnik akrajnik@gmail.com
+# 2010-03-20
+#
+#
+# chkconfig: 2345 13 87
+#
+# description: sslh - a daemon switching incoming connection between SSH and SSL/HTTPS servers
+
+# Source function library.
+. /etc/init.d/functions
+
+# ./sslh -p  0.0.0.0:8443 -l 127.0.0.1:443 -s 127.0.0.1:22
+
+SSLH="/usr/local/sbin/sslh"
+PIDFILE="/var/run/sslh"
+
+OPTIONS="--user nobody --pidfile $PIDFILE -p  0.0.0.0:8443 --ssl 127.0.0.1:443 --ssh 127.0.0.1:22"
+
+if [ -f /etc/sysconfig/sslh ]; then
+        . /etc/sysconfig/sslh
+fi
+
+start() {
+        echo -n "Starting SSL-SSH-Switch: "
+        if [ -f $PIDFILE ]; then
+                PID=`cat $PIDFILE`
+                echo sslh already running: $PID
+                exit 2;
+        else
+                daemon  $SSLH $OPTIONS
+                RETVAL=$?
+                echo
+                [ $RETVAL -eq 0 ] && touch $PIDFILE
+                return $RETVAL
+        fi
+
+}
+
+stop() {
+        echo -n "Shutting down SSL-SSH-Switch: "
+        echo
+        killproc sslh
+        echo
+        rm -f $PIDFILE
+        return 0
+}
+
+case "$1" in
+    start)
+        start
+        ;;
+    stop)
+        stop
+        ;;
+    status)
+        status sslh
+        ;;
+    restart)
+        stop
+        start
+        ;;
+    *)
+        echo "Usage:  {start|stop|status|restart}"
+        exit 1
+        ;;
+esac
+exit $?
+
+
+

scripts/systemd.sslh.service

@@ -0,0 +1,11 @@
+[Unit]
+Description=SSL/SSH multiplexer
+After=network.target
+
+[Service]
+EnvironmentFile=/etc/conf.d/sslh
+ExecStart=/usr/bin/sslh --foreground $DAEMON_OPTS
+KillMode=process
+
+[Install]
+WantedBy=multi-user.target

sslh-fork.c

@@ -0,0 +1,181 @@
+/*
+   sslh-fork: forking server
+
+# Copyright (C) 2007-2012  Yves Rutschle
+# 
+# This program is free software; you can redistribute it
+# and/or modify it under the terms of the GNU General Public
+# License as published by the Free Software Foundation; either
+# version 2 of the License, or (at your option) any later
+# version.
+# 
+# This program is distributed in the hope that it will be
+# useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+# PURPOSE.  See the GNU General Public License for more
+# details.
+# 
+# The full text for the General Public License is here:
+# http://www.gnu.org/licenses/gpl.html
+
+*/
+
+#include "common.h"
+#include "probe.h"
+
+const char* server_type = "sslh-fork";
+
+#define MAX(a, b)  (((a) > (b)) ? (a) : (b))
+
+/* shovels data from one fd to the other and vice-versa 
+   returns after one socket closed
+ */
+int shovel(struct connection *cnx)
+{
+   fd_set fds;
+   int res, i;
+   int max_fd = MAX(cnx->q[0].fd, cnx->q[1].fd) + 1;
+
+   FD_ZERO(&fds);
+   while (1) {
+      FD_SET(cnx->q[0].fd, &fds);
+      FD_SET(cnx->q[1].fd, &fds);
+
+      res = select(
+                   max_fd,
+                   &fds,
+                   NULL,
+                   NULL,
+                   NULL
+                  );
+      CHECK_RES_DIE(res, "select");
+
+      for (i = 0; i < 2; i++) {
+          if (FD_ISSET(cnx->q[i].fd, &fds)) {
+              res = fd2fd(&cnx->q[1-i], &cnx->q[i]);
+              if (!res) {
+                  if (verbose) 
+                      fprintf(stderr, "%s %s", i ? "client" : "server", "socket closed\n");
+                  return res;
+              }
+          }
+      }
+   }
+}
+
+/* Child process that finds out what to connect to and proxies 
+ */
+void start_shoveler(int in_socket)
+{
+   fd_set fds;
+   struct timeval tv;
+   struct addrinfo *saddr;
+   int res;
+   int out_socket;
+   struct connection cnx;
+   struct proto *prot;
+
+   init_cnx(&cnx);
+
+   FD_ZERO(&fds);
+   FD_SET(in_socket, &fds);
+   memset(&tv, 0, sizeof(tv));
+   tv.tv_sec = probing_timeout;
+   res = select(in_socket + 1, &fds, NULL, NULL, &tv);
+   if (res == -1)
+      perror("select");
+
+   cnx.q[0].fd = in_socket;
+
+   if (FD_ISSET(in_socket, &fds)) {
+       /* Received data: figure out what protocol it is */
+       prot = probe_client_protocol(&cnx);
+   } else {
+       /* Timed out: it's necessarily SSH */
+       prot = timeout_protocol();
+   }
+
+   saddr = prot->saddr;
+   if (prot->service && 
+       check_access_rights(in_socket, prot->service)) {
+       exit(0);
+   }
+
+   /* Connect the target socket */
+   out_socket = connect_addr(saddr, in_socket, prot->description);
+   CHECK_RES_DIE(out_socket, "connect");
+
+   cnx.q[1].fd = out_socket;
+
+   log_connection(&cnx);
+
+   flush_defered(&cnx.q[1]);
+
+   shovel(&cnx);
+
+   close(in_socket);
+   close(out_socket);
+   
+   if (verbose)
+      fprintf(stderr, "connection closed down\n");
+
+   exit(0);
+}
+
+static int *listener_pid;
+static int listener_pid_number = 0;
+
+void stop_listeners(int sig)
+{
+    int i;
+
+    for (i = 0; i < listener_pid_number; i++) {
+        kill(listener_pid[i], sig);
+    }
+}
+
+void main_loop(int listen_sockets[], int num_addr_listen)
+{
+    int in_socket, i, res;
+    struct sigaction action;
+
+    listener_pid_number = num_addr_listen;
+    listener_pid = malloc(listener_pid_number * sizeof(listener_pid[0]));
+
+    /* Start one process for each listening address */
+    for (i = 0; i < num_addr_listen; i++) {
+        if (!(listener_pid[i] = fork())) {
+
+            /* Listening process just accepts a connection, forks, and goes
+             * back to listening */
+            while (1)
+            {
+                in_socket = accept(listen_sockets[i], 0, 0);
+                if (verbose) fprintf(stderr, "accepted fd %d\n", in_socket);
+
+                if (!fork())
+                {
+                    close(listen_sockets[i]);
+                    start_shoveler(in_socket);
+                    exit(0);
+                }
+                close(in_socket);
+            }
+        }
+    }
+
+    /* Set SIGTERM to "stop_listeners" which further kills all listener
+     * processes. Note this won't kill processes that listeners forked, which
+     * means active connections remain active. */
+    memset(&action, 0, sizeof(action));
+    action.sa_handler = stop_listeners;
+    res = sigaction(SIGTERM, &action, NULL);
+    CHECK_RES_DIE(res, "sigaction");
+
+    wait(NULL);
+}
+
+/* The actual main is in common.c: it's the same for both version of
+ * the server
+ */
+

sslh-main.c

@@ -0,0 +1,513 @@
+/*
+# main: processing of config file, command line options and start the main
+# loop.
+#
+# Copyright (C) 2007-2012  Yves Rutschle
+# 
+# This program is free software; you can redistribute it
+# and/or modify it under the terms of the GNU General Public
+# License as published by the Free Software Foundation; either
+# version 2 of the License, or (at your option) any later
+# version.
+# 
+# This program is distributed in the hope that it will be
+# useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+# PURPOSE.  See the GNU General Public License for more
+# details.
+# 
+# The full text for the General Public License is here:
+# http://www.gnu.org/licenses/gpl.html
+
+*/
+
+#define _GNU_SOURCE
+#ifdef LIBCONFIG
+#include <libconfig.h>
+#endif
+#include <regex.h>
+
+#include "common.h"
+#include "probe.h"
+
+const char* USAGE_STRING =
+"sslh " VERSION "\n" \
+"usage:\n" \
+"\tsslh  [-v] [-i] [-V] [-f] [-n] [-F <file>]\n"
+"\t[-t <timeout>] [-P <pidfile>] -u <username> -p <add> [-p <addr> ...] \n" \
+"%s\n\n" /* Dynamically built list of builtin protocols */  \
+"\t[--on-timeout <addr>]\n" \
+"-v: verbose\n" \
+"-V: version\n" \
+"-f: foreground\n" \
+"-n: numeric output\n" \
+"-F: use configuration file\n" \
+"--on-timeout: connect to specified address upon timeout (default: ssh address)\n" \
+"-t: seconds to wait before connecting to --on-timeout address.\n" \
+"-p: address and port to listen on.\n    Can be used several times to bind to several addresses.\n" \
+"--[ssh,ssl,...]: where to connect connections from corresponding protocol.\n" \
+"-F: specify a configuration file\n" \
+"-P: PID file.\n" \
+"-i: Run as a inetd service.\n" \
+"";
+
+/* Constants for options that have no one-character shorthand */
+#define OPT_ONTIMEOUT   257
+
+static struct option const_options[] = {
+    { "inetd",      no_argument,            &inetd,         1 },
+    { "foreground", no_argument,            &foreground,    1 },
+    { "background", no_argument,            &background,    1 },
+    { "transparent", no_argument,           &transparent,   1 },
+    { "numeric",    no_argument,            &numeric,       1 },
+    { "verbose",    no_argument,            &verbose,       1 },
+    { "user",       required_argument,      0,              'u' },
+    { "config",     required_argument,      0,              'F' },
+    { "pidfile",    required_argument,      0,              'P' },
+    { "timeout",    required_argument,      0,              't' },
+    { "on-timeout", required_argument,      0,              OPT_ONTIMEOUT },
+    { "listen",     required_argument,      0,              'p' },
+    {}
+};
+static struct option* all_options;
+static struct proto* builtins;
+static const char *optstr = "vt:T:p:VP:F:";
+
+
+
+static void print_usage(void)
+{
+    struct proto *p;
+    int i;
+    char *prots = "";
+
+    p = get_builtins();
+    for (i = 0; i < get_num_builtins(); i++)
+        asprintf(&prots, "%s\t[--%s <addr>]\n", prots, p[i].description);
+
+    fprintf(stderr, USAGE_STRING, prots);
+}
+
+static void printsettings(void)
+{
+    char buf[NI_MAXHOST];
+    struct addrinfo *a;
+    struct proto *p;
+    
+    for (p = get_first_protocol(); p; p = p->next) {
+        fprintf(stderr,
+                "%s addr: %s. libwrap service: %s family %d %d\n", 
+                p->description, 
+                sprintaddr(buf, sizeof(buf), p->saddr), 
+                p->service,
+                p->saddr->ai_family,
+                p->saddr->ai_addr->sa_family);
+    }
+    fprintf(stderr, "listening on:\n");
+    for (a = addr_listen; a; a = a->ai_next) {
+        fprintf(stderr, "\t%s\n", sprintaddr(buf, sizeof(buf), a));
+    }
+    fprintf(stderr, "timeout: %d\non-timeout: %s\n", probing_timeout,
+            timeout_protocol()->description);
+}
+
+
+/* Extract configuration on addresses and ports on which to listen.
+ * out: newly allocated list of addrinfo to listen to
+ */
+#ifdef LIBCONFIG
+static int config_listen(config_t *config, struct addrinfo **listen) 
+{
+    config_setting_t *setting, *addr;
+    int len, i;
+    const char *hostname, *port;
+
+    setting = config_lookup(config, "listen");
+    if (setting) {
+        len = config_setting_length(setting);
+        for (i = 0; i < len; i++) {
+            addr = config_setting_get_elem(setting, i);
+            if (! (config_setting_lookup_string(addr, "host", &hostname) &&
+                   config_setting_lookup_string(addr, "port", &port))) {
+                fprintf(stderr,
+                            "line %d:Incomplete specification (hostname and port required)\n",
+                            config_setting_source_line(addr));
+                return -1;
+            }
+
+            resolve_split_name(listen, hostname, port);
+
+            /* getaddrinfo returned a list of addresses corresponding to the
+             * specification; move the pointer to the end of that list before
+             * processing the next specification */
+            for (; *listen; listen = &((*listen)->ai_next));
+        }
+    }
+
+    return 0;
+}
+#endif
+
+
+
+#ifdef LIBCONFIG
+static void setup_regex_probe(struct proto *p, config_setting_t* probes)
+{
+    int num_probes, errsize, i, res;
+    char *err;
+    const char * expr;
+    regex_t** probe_list;
+
+    num_probes = config_setting_length(probes);
+    if (!num_probes) {
+        fprintf(stderr, "%s: no probes specified\n", p->description);
+        exit(1);
+    }
+
+    p->probe = get_probe("regex");
+    probe_list = calloc(num_probes + 1, sizeof(*probe_list));
+    p->data = (void*)probe_list;
+
+    for (i = 0; i < num_probes; i++) {
+        probe_list[i] = malloc(sizeof(*(probe_list[i])));
+        expr = config_setting_get_string_elem(probes, i);
+        res = regcomp(probe_list[i], expr, 0);
+        if (res) {
+            err = malloc(errsize = regerror(res, probe_list[i], NULL, 0));
+            regerror(res, probe_list[i], err, errsize);
+            fprintf(stderr, "%s:%s\n", expr, err);
+            free(err);
+            exit(1);
+        }
+    }
+}
+#endif
+
+/* Extract configuration for protocols to connect to.
+ * out: newly-allocated list of protocols
+ */
+#ifdef LIBCONFIG
+static int config_protocols(config_t *config, struct proto **prots)
+{
+    config_setting_t *setting, *prot, *probes;
+    const char *hostname, *port, *name;
+    int i, num_prots;
+    struct proto *p, *prev = NULL;
+
+    setting = config_lookup(config, "protocols");
+    if (setting) {
+        num_prots = config_setting_length(setting);
+        for (i = 0; i < num_prots; i++) {
+            p = calloc(1, sizeof(*p));
+            if (i == 0) *prots = p;
+            if (prev) prev->next = p;
+            prev = p;
+
+            prot = config_setting_get_elem(setting, i);
+            if ((config_setting_lookup_string(prot, "name", &name) &&
+                 config_setting_lookup_string(prot, "host", &hostname) &&
+                 config_setting_lookup_string(prot, "port", &port)
+                )) {
+                p->description = name;
+                config_setting_lookup_string(prot, "service", &(p->service));
+
+                resolve_split_name(&(p->saddr), hostname, port);
+
+
+                probes = config_setting_get_member(prot, "probe");
+                if (probes) {
+                    if (config_setting_is_array(probes)) {
+                        /* If 'probe' is an array, setup a regex probe using the
+                         * array of strings as pattern */
+
+                        setup_regex_probe(p, probes);
+
+                    } else {
+                        /* if 'probe' is 'builtin', set the probe to the
+                         * appropriate builtin protocol */
+                        if (!strcmp(config_setting_get_string(probes), "builtin")) {
+                            p->probe = get_probe(name);
+                            if (!p->probe) {
+                                fprintf(stderr, "%s: no builtin probe for this protocol\n", name);
+                                exit(1);
+                            }
+                        } else {
+                            fprintf(stderr, "%s: illegal probe name\n", name);
+                            exit(1);
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    return 0;
+}
+#endif
+
+/* Parses a config file
+ * in: *filename
+ * out: *listen, a newly-allocated linked list of listen addrinfo
+ *      *prots, a newly-allocated linked list of protocols
+ */
+#ifdef LIBCONFIG
+static int config_parse(char *filename, struct addrinfo **listen, struct proto **prots)
+{
+    config_t config;
+    long int timeout;
+    const char* str;
+
+    config_init(&config);
+    if (config_read_file(&config, filename) == CONFIG_FALSE) {
+        fprintf(stderr, "%s:%d:%s\n", 
+                    filename,
+                    config_error_line(&config),
+                    config_error_text(&config));
+        exit(1);
+    }
+
+    config_lookup_bool(&config, "verbose", &verbose);
+    config_lookup_bool(&config, "inetd", &inetd);
+    config_lookup_bool(&config, "foreground", &foreground);
+    config_lookup_bool(&config, "numeric", &numeric);
+
+    if (config_lookup_int(&config, "timeout", &timeout) == CONFIG_TRUE) {
+        probing_timeout = timeout;
+    }
+
+    if (config_lookup_string(&config, "on-timeout", &str)) {
+        set_ontimeout(str);
+    }
+
+    config_lookup_string(&config, "user", &user_name);
+    config_lookup_string(&config, "pidfile", &pid_file);
+
+    config_listen(&config, listen);
+    config_protocols(&config, prots);
+
+    return 0;
+}
+#endif
+
+/* Adds protocols to the list of options, so command-line parsing uses the
+ * protocol definition array 
+ * options: array of options to add to; must be big enough
+ * n_opts: number of options in *options before calling (i.e. where to append)
+ * prot: array of protocols
+ * n_prots: number of protocols in *prot
+ * */
+static void append_protocols(struct option *options, int n_opts, struct proto *prot , int n_prots)
+{
+    int o, p;
+
+    for (o = n_opts, p = 0; p < n_prots; o++, p++) {
+        options[o].name = prot[p].description;
+        options[o].has_arg = required_argument;
+        options[o].flag = 0;
+        options[o].val = p + PROT_SHIFT;
+    }
+}
+
+static void make_alloptions(void)
+{
+    builtins = get_builtins();
+
+    /* Create all_options, composed of const_options followed by one option per
+     * known protocol */
+    all_options = calloc(ARRAY_SIZE(const_options) + get_num_builtins(), sizeof(struct option));
+    memcpy(all_options, const_options, sizeof(const_options));
+    append_protocols(all_options, ARRAY_SIZE(const_options) - 1, builtins, get_num_builtins());
+}
+
+/* Performs a first scan of command line options to see if a configuration file
+ * is specified. If there is one, parse it now before all other options (so
+ * configuration file settings can be overridden from the command line).
+ *
+ * prots: newly-allocated list of configured protocols, if any.
+ */
+static void cmdline_config(int argc, char* argv[], struct proto** prots)
+{
+#ifdef LIBCONFIG
+    int c, res;
+    char *config_filename;
+#endif
+
+    make_alloptions();
+
+#ifdef LIBCONFIG
+    optind = 1;
+    opterr = 0; /* we're missing protocol options at this stage so don't output errors */
+    while ((c = getopt_long_only(argc, argv, optstr, all_options, NULL)) != -1) {
+        if (c == 'F') {
+            config_filename = optarg;
+            /* find the end of the listen list */
+            res = config_parse(config_filename, &addr_listen, prots);
+            if (res)
+                exit(4);
+            break;
+        }
+    }
+#endif
+}
+
+
+/* Parse command-line options. prots points to a list of configured protocols,
+ * potentially non-allocated */
+static void parse_cmdline(int argc, char* argv[], struct proto* prots)
+{
+    int c;
+    struct addrinfo **a;
+    struct proto *p;
+
+    optind = 1;
+    opterr = 1;
+next_arg:
+    while ((c = getopt_long_only(argc, argv, optstr, all_options, NULL)) != -1) {
+        if (c == 0) continue;
+
+        if (c >= PROT_SHIFT) {
+            if (prots)
+                for (p = prots; p && p->next; p = p->next) {
+                    /* override if protocol was already defined by config file 
+                     * (note it only overrides address and use builtin probe) */
+                    if (!strcmp(p->description, builtins[c-PROT_SHIFT].description)) {
+                        resolve_name(&(p->saddr), optarg);
+                        p->probe = builtins[c-PROT_SHIFT].probe;
+                        goto next_arg;
+                    }
+                }
+            /* At this stage, it's a new protocol: add it to the end of the
+             * list */
+            if (!prots) {
+                /* No protocols yet -- create the list */
+                p = prots = calloc(1, sizeof(*p));
+            } else {
+                p->next = calloc(1, sizeof(*p));
+                p = p->next;
+            }
+            memcpy(p, &builtins[c-PROT_SHIFT], sizeof(*p));
+            resolve_name(&(p->saddr), optarg);
+            continue;
+        }
+
+        switch (c) {
+
+        case 'F':
+            /* Legal option, but do nothing, it was already processed in
+             * cmdline_config() */
+#ifndef LIBCONFIG
+            fprintf(stderr, "Built without libconfig support: configuration file not available.\n");
+            exit(1);
+#endif
+            break;
+
+        case 't':
+             probing_timeout = atoi(optarg);
+            break;
+
+        case OPT_ONTIMEOUT:
+            set_ontimeout(optarg);
+            break;
+
+        case 'p':
+            /* find the end of the listen list */
+            for (a = &addr_listen; *a; a = &((*a)->ai_next));
+            /* append the specified addresses */
+            resolve_name(a, optarg);
+            
+            break;
+
+        case 'V':
+            printf("%s %s\n", server_type, VERSION);
+            exit(0);
+
+        case 'u':
+            user_name = optarg;
+            break;
+
+        case 'P':
+            pid_file = optarg;
+            break;
+
+        case 'v':
+            verbose++;
+            break;
+
+        default:
+            print_usage();
+            exit(2);
+        }
+    }
+
+    if (!prots) {
+        fprintf(stderr, "At least one target protocol must be specified.\n");
+        exit(2);
+    }
+
+    set_protocol_list(prots);
+
+    if (!addr_listen) {
+        fprintf(stderr, "No listening address specified; use at least one -p option\n");
+        exit(1);
+    }
+
+    /* Did command-line override foreground setting? */
+    if (background)
+        foreground = 0;
+
+}
+
+int main(int argc, char *argv[])
+{
+
+   extern char *optarg;
+   extern int optind;
+   int res, num_addr_listen;
+   struct proto* protocols = NULL;
+
+   int *listen_sockets;
+
+   /* Init defaults */
+   pid_file = NULL;
+   user_name = NULL;
+
+   cmdline_config(argc, argv, &protocols);
+   parse_cmdline(argc, argv, protocols);
+
+   if (inetd)
+   {
+       verbose = 0;
+       start_shoveler(0);
+       exit(0);
+   }
+
+   if (verbose)
+       printsettings();
+
+   num_addr_listen = start_listen_sockets(&listen_sockets, addr_listen);
+
+   if (!foreground) {
+       if (fork() > 0) exit(0); /* Detach */
+
+       /* New session -- become group leader */
+       if (getuid() == 0) {
+           res = setsid();
+           CHECK_RES_DIE(res, "setsid: already process leader");
+       }
+   }
+
+   setup_signals();
+
+   if (pid_file)
+       write_pid_file(pid_file);
+
+   if (user_name)
+       drop_privileges(user_name);
+
+   /* Open syslog connection */
+   setup_syslog(argv[0]);
+
+   main_loop(listen_sockets, num_addr_listen);
+
+   return 0;
+}

sslh-select.c

@@ -0,0 +1,358 @@
+/*
+   sslh-select: mono-processus server
+
+# Copyright (C) 2007-2010  Yves Rutschle
+# 
+# This program is free software; you can redistribute it
+# and/or modify it under the terms of the GNU General Public
+# License as published by the Free Software Foundation; either
+# version 2 of the License, or (at your option) any later
+# version.
+# 
+# This program is distributed in the hope that it will be
+# useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+# PURPOSE.  See the GNU General Public License for more
+# details.
+# 
+# The full text for the General Public License is here:
+# http://www.gnu.org/licenses/gpl.html
+
+*/
+
+#define __LINUX__
+
+#include "common.h"
+#include "probe.h"
+
+const char* server_type = "sslh-select";
+
+/* cnx_num_alloc is the number of connection to allocate at once (at start-up,
+ * and then every time we get too many simultaneous connections: e.g. start
+ * with 100 slots, then if we get more than 100 connections allocate another
+ * 100 slots, and so on). We never free up connection structures. We try to
+ * allocate as many structures at once as will fit in one page (which is 102
+ * in sslh 1.9 on Linux on x86)
+ */
+static long cnx_num_alloc;
+
+/* Make the file descriptor non-block  */
+int set_nonblock(int fd)
+{
+    int flags;
+
+    flags = fcntl(fd, F_GETFL);
+    CHECK_RES_RETURN(flags, "fcntl");
+
+    flags |= O_NONBLOCK;
+
+    flags = fcntl(fd, F_SETFL, flags);
+    CHECK_RES_RETURN(flags, "fcntl");
+
+    return flags;
+}
+
+int tidy_connection(struct connection *cnx, fd_set *fds, fd_set *fds2)
+{
+    int i;
+
+    for (i = 0; i < 2; i++) {
+        if (cnx->q[i].fd != -1) {
+            if (verbose)
+                fprintf(stderr, "closing fd %d\n", cnx->q[i].fd);
+
+            close(cnx->q[i].fd);
+            FD_CLR(cnx->q[i].fd, fds);
+            FD_CLR(cnx->q[i].fd, fds2);
+            if (cnx->q[i].defered_data)
+                free(cnx->q[i].defered_data);
+        }
+    }
+    init_cnx(cnx);
+    return 0;
+}
+
+/* if fd becomes higher than FD_SETSIZE, things won't work so well with FD_SET
+ * and FD_CLR. Need to drop connections if we go above that limit */
+int fd_is_in_range(int fd) {
+    if (fd >= FD_SETSIZE) {
+        log_message(LOG_ERR, "too many open file descriptor to monitor them all -- dropping connection\n");
+        return 0;
+    }
+    return 1;
+}
+
+/* Accepts a connection from the main socket and assigns it to an empty slot.
+ * If no slots are available, allocate another few. If that fails, drop the
+ * connexion */
+int accept_new_connection(int listen_socket, struct connection *cnx[], int* cnx_size) 
+{
+    int in_socket, free, i, res;
+    struct connection *new;
+
+    in_socket = accept(listen_socket, 0, 0);
+    CHECK_RES_RETURN(in_socket, "accept");
+
+    if (!fd_is_in_range(in_socket))
+        return -1;
+
+    res = set_nonblock(in_socket);
+    if (res == -1) return -1;
+
+    /* Find an empty slot */
+    for (free = 0; (free < *cnx_size) && ((*cnx)[free].q[0].fd != -1); free++) {
+        /* nothing */
+    }
+    if (free >= *cnx_size)  {
+        if (verbose)
+            fprintf(stderr, "buying more slots from the slot machine.\n");
+        new = realloc(*cnx, (*cnx_size + cnx_num_alloc) * sizeof((*cnx)[0]));
+        if (!new) {
+            log_message(LOG_ERR, "unable to realloc -- dropping connection\n");
+            return -1;
+        }
+        *cnx = new;
+        *cnx_size += cnx_num_alloc;
+        for (i = free; i < *cnx_size; i++) {
+            init_cnx(&(*cnx)[i]); 
+        }
+    }
+    (*cnx)[free].q[0].fd = in_socket;
+    (*cnx)[free].state = ST_PROBING;
+    (*cnx)[free].probe_timeout = time(NULL) + probing_timeout;
+
+    if (verbose) 
+        fprintf(stderr, "accepted fd %d on slot %d\n", in_socket, free);
+
+    return in_socket;
+}
+
+
+/* Connect queue 1 of connection to SSL; returns new file descriptor */
+int connect_queue(struct connection *cnx, struct addrinfo *addr, 
+                  const char* cnx_name,
+                  fd_set *fds_r, fd_set *fds_w)
+{
+    struct queue *q = &cnx->q[1];
+
+    q->fd = connect_addr(addr, cnx->q[0].fd, cnx_name);
+    if ((q->fd != -1) && fd_is_in_range(q->fd)) {
+        log_connection(cnx);
+        set_nonblock(q->fd);
+        flush_defered(q);
+        if (q->defered_data) {
+            FD_SET(q->fd, fds_w);
+        } else {
+            FD_SET(q->fd, fds_r);
+        }
+        return q->fd;
+    } else {
+        tidy_connection(cnx, fds_r, fds_w);
+        return -1;
+    }
+}
+
+/* shovels data from active fd to the other
+   returns after one socket closed or operation would block
+ */
+void shovel(struct connection *cnx, int active_fd, 
+            fd_set *fds_r, fd_set *fds_w)
+{
+    struct queue *read_q, *write_q;
+
+    read_q = &cnx->q[active_fd];
+    write_q = &cnx->q[1-active_fd];
+
+    if (verbose)
+        fprintf(stderr, "activity on fd%d\n", read_q->fd);
+
+    switch(fd2fd(write_q, read_q)) {
+    case -1:
+    case FD_CNXCLOSED:
+        tidy_connection(cnx, fds_r, fds_w);
+        break;
+
+    case FD_STALLED:
+        FD_SET(write_q->fd, fds_w);
+        FD_CLR(read_q->fd, fds_r);
+        break;
+
+    default: /* Nothing */
+        break;
+    }
+}
+
+/* returns true if specified fd is initialised and present in fd_set */
+int is_fd_active(int fd, fd_set* set)
+{
+    if (fd == -1) return 0;
+    return FD_ISSET(fd, set);
+}
+
+/* Main loop: the idea is as follow:
+ * - fds_r and fds_w contain the file descritors to monitor in read and write
+ * - When a file descriptor goes off, process it: read from it, write the data
+ * to its corresponding pair.
+ * - When a file descriptor blocks when writing, remove the read fd from fds_r,
+ * move the data to a defered buffer, and add the write fd to fds_w. Defered
+ * buffer is allocated dynamically.
+ * - When we can write to a file descriptor that has defered data, we try to
+ * write as much as we can. Once all data is written, remove the fd from fds_w
+ * and add its corresponding pair to fds_r, free the buffer.
+ *
+ * That way, each pair of file descriptor (read from one, write to the other)
+ * is monitored either for read or for write, but never for both.
+ */
+void main_loop(int listen_sockets[], int num_addr_listen)
+{
+    fd_set fds_r, fds_w;  /* reference fd sets (used to init the next 2) */
+    fd_set readfds, writefds; /* working read and write fd sets */
+    struct timeval tv;
+    int max_fd, in_socket, i, j, res;
+    struct connection *cnx;
+    struct proto *prot;
+    int num_cnx;  /* Number of connections in *cnx */
+    int num_probing = 0; /* Number of connections currently probing 
+                          * We use this to know if we need to time out of
+                          * select() */
+
+    FD_ZERO(&fds_r);
+    FD_ZERO(&fds_w);
+
+    for (i = 0; i < num_addr_listen; i++) {
+        FD_SET(listen_sockets[i], &fds_r); 
+        set_nonblock(listen_sockets[i]);
+    }
+    max_fd = listen_sockets[num_addr_listen-1] + 1;
+
+    cnx_num_alloc = getpagesize() / sizeof(struct connection);
+
+    num_cnx = cnx_num_alloc; /* Start with a set pool of slots */
+    cnx = malloc(num_cnx * sizeof(struct connection));
+    for (i = 0; i < num_cnx; i++)
+        init_cnx(&cnx[i]);
+
+    while (1)
+    {
+        memset(&tv, 0, sizeof(tv));
+        tv.tv_sec = probing_timeout;
+
+        memcpy(&readfds, &fds_r, sizeof(readfds));
+        memcpy(&writefds, &fds_w, sizeof(writefds));
+
+        if (verbose)
+            fprintf(stderr, "selecting... max_fd=%d num_probing=%d\n", max_fd, num_probing);
+        res = select(max_fd, &readfds, &writefds, NULL, num_probing ? &tv : NULL);
+        if (res < 0)
+            perror("select");
+
+
+        /* Check main socket for new connections */
+        for (i = 0; i < num_addr_listen; i++) {
+            if (FD_ISSET(listen_sockets[i], &readfds)) {
+                in_socket = accept_new_connection(listen_sockets[i], &cnx, &num_cnx);
+                if (in_socket != -1)
+                    num_probing++;
+
+                if (in_socket > 0) {
+                    FD_SET(in_socket, &fds_r);
+                    if (in_socket >= max_fd)
+                        max_fd = in_socket + 1;;
+                }
+                FD_CLR(listen_sockets[i], &readfds);
+            }
+        }
+
+        /* Check all sockets for write activity */
+        for (i = 0; i < num_cnx; i++) {
+            if (cnx[i].q[0].fd != -1) {
+                for (j = 0; j < 2; j++) {
+                    if (is_fd_active(cnx[i].q[j].fd, &writefds)) {
+                        res = flush_defered(&cnx[i].q[j]);
+                        if ((res == -1) && ((errno == EPIPE) || (errno == ECONNRESET))) {
+                            if (cnx[i].state == ST_PROBING) num_probing--;
+                            tidy_connection(&cnx[i], &fds_r, &fds_w);
+                            if (verbose)
+                                fprintf(stderr, "closed slot %d\n", i);
+                        } else {
+                            /* If no defered data is left, stop monitoring the fd 
+                             * for write, and restart monitoring the other one for reads*/
+                            if (!cnx[i].q[j].defered_data_size) {
+                                FD_CLR(cnx[i].q[j].fd, &fds_w);
+                                FD_SET(cnx[i].q[1-j].fd, &fds_r);
+                            }
+                        }
+                    }
+                }
+            }
+        }
+
+        /* Check all sockets for read activity */
+        for (i = 0; i < num_cnx; i++) {
+            for (j = 0; j < 2; j++) {
+                if (is_fd_active(cnx[i].q[j].fd, &readfds) || 
+                    ((cnx[i].state == ST_PROBING) && (cnx[i].probe_timeout < time(NULL)))) {
+                    if (verbose)
+                        fprintf(stderr, "processing fd%d slot %d\n", j, i);
+
+                    switch (cnx[i].state) {
+
+                    case ST_PROBING:
+                        if (j == 1) {
+                            fprintf(stderr, "Activity on fd2 while probing, impossible\n");
+                            dump_connection(&cnx[i]);
+                            exit(1);
+                        }
+                        num_probing--;
+                        cnx[i].state = ST_SHOVELING;
+
+                        /* If timed out it's SSH, otherwise the client sent
+                         * data so probe the protocol */
+                        if ((cnx[i].probe_timeout < time(NULL))) {
+                            prot = timeout_protocol();
+                        } else {
+                            prot = probe_client_protocol(&cnx[i]);
+                        }
+
+                        /* libwrap check if required for this protocol */
+                        if (prot->service && 
+                            check_access_rights(in_socket, prot->service)) {
+                            tidy_connection(&cnx[i], &fds_r, &fds_w);
+                            res = -1;
+                        } else {
+                            res = connect_queue(&cnx[i], 
+                                                prot->saddr, 
+                                                prot->description, 
+                                                &fds_r, &fds_w);
+                        }
+
+                        if (res >= max_fd)
+                            max_fd = res + 1;;
+                        break;
+
+                    case ST_SHOVELING:
+                        shovel(&cnx[i], j, &fds_r, &fds_w);
+                        break;
+
+                    default: /* illegal */
+                        log_message(LOG_ERR, "Illegal connection state %d\n", cnx[i].state);
+                        exit(1);
+                    }
+                }
+            }
+        }
+    }
+}
+
+
+void start_shoveler(int listen_socket) {
+    fprintf(stderr, "inetd mode is not supported in select mode\n");
+    exit(1);
+}
+
+
+/* The actual main is in common.c: it's the same for both version of
+ * the server
+ */
+
+

sslh.c

@@ -1,432 +0,0 @@
-/*
-   Reimplementation of sslh in C
-
-# Copyright (C) 2007-2008  Yves Rutschle
-# 
-# This program is free software; you can redistribute it
-# and/or modify it under the terms of the GNU General Public
-# License as published by the Free Software Foundation; either
-# version 2 of the License, or (at your option) any later
-# version.
-# 
-# This program is distributed in the hope that it will be
-# useful, but WITHOUT ANY WARRANTY; without even the implied
-# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
-# PURPOSE.  See the GNU General Public License for more
-# details.
-# 
-# The full text for the General Public License is here:
-# http://www.gnu.org/licenses/gpl.html
-
-Comments? questions? sslh@rutschle.net
-
-Compilation instructions:
-
-Solaris:
-  cc -o sslh sslh.c -lresolv -lsocket -lnsl
-
-LynxOS:
-  gcc -o tcproxy tcproxy.c -lnetinet
-
-HISTORY
-
-v1.2: 12MAY2008
-        Fixed compilation warning for AMD64 (Thx Daniel Lange)
-
-v1.1: 21MAY2007
-        Making sslhc more like a real daemon:
-        * If $PIDFILE is defined, write first PID to it upon startup
-        * Fork at startup (detach from terminal)
-        (thanks to http://www.enderunix.org/docs/eng/daemon.php -- good checklist)
-        * Less memory usage (?)
-
-v1.0: 
-        * Basic functionality: privilege dropping, target hostnames and ports
-        configurable.
-
-*/
-
-#define VERSION "1.2"
-
-#include <sys/types.h>
-#include <fcntl.h>
-#include <string.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <signal.h>
-#include <sys/socket.h>
-#include <sys/wait.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <netdb.h>
-#include <pwd.h>
-
-#define CHECK_RES_DIE(res, str) \
-if (res == -1) {    \
-   perror(str);     \
-   exit(1);         \
-}
-
-#define USAGE_STRING \
-"sslh v" VERSION "\n" \
-"usage:\n" \
-"\texport PIDFILE=/var/run/sslhc.pid\n" \
-"\tsslh [-t <timeout>] -u <username> -p <listenport> -s [sshhost:]port -l [sslhost:]port [-v]\n"
-
-int verbose = 0; /* That's really quite global */
-
-/* Starts a listening socket on specified port.
-   Returns file descriptor
-   */
-int start_listen_socket(int port)
-{
-   struct sockaddr_in saddr;
-   int sockfd, res, reuse;
-
-   sockfd = socket(AF_INET, SOCK_STREAM, 0);
-   CHECK_RES_DIE(sockfd, "socket");
-
-   reuse = 1;
-   res = setsockopt(sockfd, SOL_SOCKET, SO_REUSEADDR, (char*)&reuse, sizeof(reuse));
-   CHECK_RES_DIE(res, "setsockopt");
-
-   memset(&saddr, 0, sizeof(saddr));
-   saddr.sin_port = htons(port);
-
-   res = bind (sockfd, (struct sockaddr*)&saddr, sizeof(saddr));
-   CHECK_RES_DIE(res, "bind");
-
-   res = listen (sockfd, 5);
-   CHECK_RES_DIE(res, "listen");
-
-   return sockfd;
-}
-
-
-/* 
- * moves data from one fd to other
- * returns 0 if incoming socket closed, size moved otherwise
- */
-int fd2fd(int target, int from)
-{
-   char buffer[BUFSIZ];
-   int size;
-
-   size = read(from, buffer, sizeof(buffer));
-   CHECK_RES_DIE(size, "read");
-
-   if (size == 0)
-      return 0;
-
-   size = write(target, buffer, size);
-   CHECK_RES_DIE(size, "write");
-
-   return size;
-}
-
-/* shovels data from one fd to the other and vice-versa 
-   returns after one socket closed
- */
-int shovel(int fd1, int fd2)
-{
-   fd_set fds;
-   int res;
-
-   FD_ZERO(&fds);
-   while (1) {
-      FD_SET(fd1, &fds);
-      FD_SET(fd2, &fds);
-
-      res = select( 
-                      (fd1 > fd2 ? fd1 : fd2 ) + 1,
-                      &fds,
-                      NULL,
-                      NULL,
-                      NULL
-            );
-      CHECK_RES_DIE(res, "select");
-
-      if (FD_ISSET(fd1, &fds)) {
-         res = fd2fd(fd2, fd1);
-         if (!res) {
-            if (verbose) fprintf(stderr, "client socket closed\n");
-            return res;
-         }
-      }
-
-      if (FD_ISSET(fd2, &fds)) {
-         res = fd2fd(fd1, fd2);
-         if (!res) {
-            if (verbose) fprintf(stderr, "server socket closed\n");
-            return res;
-         }
-      }
-   }
-}
-
-/* returns a string that prints the IP and port of the sockaddr */
-char* sprintaddr(char* buf, size_t size, struct sockaddr* s)
-{
-   char addr_str[1024];
-
-   inet_ntop(AF_INET, &((struct sockaddr_in*)s)->sin_addr, addr_str, sizeof(addr_str));
-   snprintf(buf, size, "%s:%d", addr_str, ntohs(((struct sockaddr_in*)s)->sin_port));
-   return buf;
-}
-
-/* turns a "hostname:port" string into a struct sockaddr;
-sock: socket address to which to copy the addr
-fullname: input string -- it gets clobbered
-serv: default service/port
-(defaults don't work yet)
-*/
-void resolve_name(struct sockaddr *sock, char* fullname, int port) {
-   struct addrinfo *addr, hint;
-   char *serv, *host;
-   int res;
-
-   char *sep = strchr(fullname, ':');
-
-   if (!sep) /* No separator: parameter is just a port */
-   {
-      serv = fullname;
-      fprintf(stderr, "names must be fully specified as hostname:port for the moment\n");
-      exit(1);
-   }
-   else {
-      host = fullname;
-      serv = sep+1;
-      *sep = 0;
-   }
-
-   memset(&hint, 0, sizeof(hint));
-   hint.ai_family = PF_INET;
-   hint.ai_socktype = SOCK_STREAM;
-
-   res = getaddrinfo(host, serv, &hint, &addr);
-   if (res) {
-      fprintf(stderr, "%s\n", gai_strerror(res));
-      if (res == EAI_SERVICE)
-         fprintf(stderr, "(Check you have specified all ports)\n");
-      exit(1);
-   }
-
-   memcpy(sock, addr->ai_addr, sizeof(*sock));
-}
-
-/* 
- * Settings that depend on the command line. That's less global than verbose * :-)
- * They're set in main(), but also used in start_shoveler(), and it'd be heavy-handed
- * to pass it all as parameters
- */
-int timeout = 2;
-int listen_port = 443;
-struct sockaddr addr_ssl, addr_ssh;
-
-
-/* Child process that finds out what to connect to and proxies 
- */
-void start_shoveler(int in_socket)
-{
-   fd_set fds;
-   struct timeval tv;
-   struct sockaddr *saddr;
-   int res;
-   int out_socket;
-
-   FD_ZERO(&fds);
-   FD_SET(in_socket, &fds);
-   memset(&tv, 0, sizeof(tv));
-   tv.tv_sec = timeout;
-   res = select(in_socket + 1, &fds, NULL, NULL, &tv);
-   if (res == -1)
-      perror("select");
-
-   /* Pick the target address depending on whether we timed out or not */
-   if (FD_ISSET(in_socket, &fds)) {
-      /* The client wrote something to the socket: it's an SSL connection */
-      saddr = &addr_ssl;
-      if (verbose)
-         fprintf(stderr, "Forwarding to SSL\n");
-   } else {
-      /* The client hasn't written anything and we timed out: connect to SSH */
-      saddr = &addr_ssh;
-      if (verbose)
-         fprintf(stderr, "Forwarding to SSH\n");
-   }
-
-   /* Connect the target socket */
-   out_socket = socket(AF_INET, SOCK_STREAM, 0);
-   res = connect(out_socket, saddr, sizeof(addr_ssl));
-   CHECK_RES_DIE(res, "connect");
-   if (verbose)
-      fprintf(stderr, "connected to something\n");
-
-   shovel(in_socket, out_socket);
-
-   close(in_socket);
-   close(out_socket);
-   
-   if (verbose)
-      fprintf(stderr, "connection closed down\n");
-
-   exit(0);
-}
-
-/* SIGCHLD handling:
- * we need to reap our children
- */
-void child_handler(int signo)
-{
-    signal(SIGCHLD, &child_handler);
-    wait(NULL);
-}
-void setup_signals(void)
-{
-    void* res;
-
-    res = signal(SIGCHLD, &child_handler);
-    if (res == SIG_ERR) {
-        perror("signal");
-        exit(1);
-    }
-}
-
-
-/* We don't want to run as root -- drop priviledges if required */
-void drop_privileges(char* user_name)
-{
-    int res;
-    struct passwd *pw = getpwnam(user_name);
-    if (!pw) {
-        fprintf(stderr, "%s: not found\n", user_name);
-        exit(1);
-    }
-    if (verbose)
-        fprintf(stderr, "turning into %s\n", user_name);
-
-    res = setgid(pw->pw_gid);
-    CHECK_RES_DIE(res, "setgid");
-    setuid(pw->pw_uid);
-    CHECK_RES_DIE(res, "setuid");
-}
-
-/* Writes my PID if $PIDFILE is defined */
-void write_pid_file(void)
-{
-    char *pidfile = getenv("PIDFILE");
-    FILE *f;
-
-    if (!pidfile)
-        return;
-
-    f = fopen(pidfile, "w");
-    if (!f) {
-        perror(pidfile);
-        exit(1);
-    }
-
-    fprintf(f, "%d\n", getpid());
-    fclose(f);
-}
-
-void printsettings(void)
-{
-    char buf[64];
-
-    fprintf(
-            stderr, 
-            "SSL addr: %s (after timeout %ds)\n",
-            sprintaddr(buf, sizeof(buf), &addr_ssl), 
-            timeout
-           );
-    fprintf(stderr, "SSH addr: %s\n", sprintaddr(buf, sizeof(buf), &addr_ssh));
-    fprintf(stderr, "listening on port %d\n", listen_port);
-}
-
-int main(int argc, char *argv[])
-{
-
-   extern char *optarg;
-   extern int optind;
-   int c, res;
-
-   int in_socket, listen_socket;
-
-   /* Init defaults */
-   char *user_name = "nobody";
-   char ssl_str[] = "localhost:443";
-   char ssh_str[] = "localhost:22";
-
-   resolve_name(&addr_ssl, ssl_str, 443);
-   resolve_name(&addr_ssh, ssh_str, 22);
-
-   while ((c = getopt(argc, argv, "t:l:s:p:vu:")) != EOF) {
-      switch (c) {
-
-              case 't':
-                      timeout = atoi(optarg);
-                      break;
-
-              case 'p':
-                      listen_port = atoi(optarg);
-                      break;
-
-              case 'l':
-                      resolve_name(&addr_ssl, optarg, 443);
-                      break;
-
-              case 's':
-                      resolve_name(&addr_ssh, optarg, 22);
-                      break;
-
-              case 'v':
-                      verbose += 1;
-                      break;
-
-              case 'u':
-                      user_name = optarg;
-                      break;
-
-              default:
-                      fprintf(stderr, USAGE_STRING);
-                      exit(2);
-      }
-   }
-
-   if (verbose)
-       printsettings();
-
-   setup_signals();
-
-   listen_socket = start_listen_socket(listen_port);
-
-   if (fork() > 0) exit(0); /* Detach */
-
-   write_pid_file();
-
-   drop_privileges(user_name);
-
-   /* New session -- become group leader */
-   res = setsid();
-   CHECK_RES_DIE(res, "setsid: already process leader");
-
-   /* Main server loop: accept connections, find what they are, fork shovelers */
-   while (1)
-   {
-      in_socket = accept(listen_socket, 0, 0);
-      if (verbose) fprintf(stderr, "accepted fd %d\n", in_socket);
-
-      if (!fork())
-      {
-         start_shoveler(in_socket);
-         exit(0);
-      }
-      close(in_socket);
-   }
-
-   return 0;
-}
-
-

sslh.pod

@@ -0,0 +1,219 @@
+# I'm just not gonna write troff :-)
+
+=head1 NAME
+
+ sslh - protocol demultiplexer
+
+=head1 SYNOPSIS
+
+sslh [B<-F> I<config file>] [ B<-t> I<num> ] [B<-p> I<listening address> [B<-p> I<listening address> ...] [B<--ssl> I<target address for SSL>] [B<--ssh> I<target address for SSH>] [B<--openvpn> I<target address for OpenVPN>] [B<--http> I<target address for HTTP>] [B<--anyprot> I<default target address>] [B<--on-timeout> I<protocol name>] [B<-u> I<username>] [B<-P> I<pidfile>] [-v] [-i] [-V] [-f] [-n]
+
+=head1 DESCRIPTION
+
+B<sslh> accepts connections on specified ports, and forwards
+them further based on tests performed on the first data
+packet sent by the remote client.
+
+Probes for HTTP, SSL, SSH, OpenVPN, tinc, XMPP are
+implemented, and any other protocol that can be tested using
+a regular expression, can be recognised. A typical use case
+is to allow serving several services on port 443 (e.g. to
+connect to ssh from inside a corporate firewall, which
+almost never block port 443) while still serving HTTPS on
+that port. 
+
+Hence B<sslh> acts as a protocol demultiplexer, or a
+switchboard. Its name comes from its original function to
+serve SSH and HTTPS on the same port.
+
+=head2 Libwrap support
+
+One drawback of B<sslh> is that the servers do not see the
+original IP address of the client anymore, as the connection
+is forwarded through B<sslh>.
+
+For this reason, B<sslh> can be compiled with B<libwrap> to
+check accesses defined in F</etc/hosts.allow> and
+F</etc/hosts.deny>.  Libwrap services can be defined using
+the configuration file.
+
+=head2 Configuration file
+
+A configuration file can be supplied to B<sslh>. Command
+line arguments override file settings. B<sslh> uses
+B<libconfig> to parse the configuration file, so the general
+file format is indicated in
+L<http://www.hyperrealm.com/libconfig/libconfig_manual.html>.
+Please refer to the example configuration file provided with
+B<sslh> for the specific format (Options have the same names
+as on the command line, except for the list of listen ports
+and the list of protocols).
+
+The configuration file makes it possible to specify
+protocols using regular expressions: a list of regular
+expressions is given as the I<probe> parameter, and if the
+first packet received from the client matches any of these
+expressions, B<sslh> connects to that protocol.
+
+Alternatively, the I<probe> parameter can be set to
+"builtin", to use the compiled probes which are much faster
+than regular expressions.
+
+=head2 Probing protocols
+
+When receiving an incoming connection, B<sslh> will read the
+first bytes sent be the connecting client. It will then
+probe for the protocol in the order specified on the command
+line (or the configuration file). Therefore B<--anyprot>
+should alway be used last, as it always succeeds and further
+protocols will never be tried.
+
+If no data is sent by the client, B<sslh> will eventually
+time out and connect to the protocol specified with
+B<--on-timeout>, or I<ssh> if none is specified.
+
+=head1 OPTIONS
+
+=over 4
+
+=item B<-t> I<num>, B<--timeout> I<num>
+
+Timeout before forwarding the connection to the timeout
+protocol (which should usually be SSH). Default is 2s.
+
+=item B<--on-timeout> I<protocol name>
+
+Name of the protocol to connect to after the timeout period
+is over. Default is 'ssh'.
+
+=item B<-p> I<listening address>, B<--listen> I<listening address>
+
+Interface and port on which to listen, e.g. I<foobar:443>,
+where I<foobar> is the name of an interface (typically the
+IP address on which the Internet connection ends up).
+
+This can be specified several times to bind B<sslh> to
+several addresses.
+
+=item B<--ssl> I<target address>
+=item B<--tls> I<target address>
+
+Interface and port on which to forward SSL connection,
+typically I<localhost:443>.
+
+Note that you can set B<sslh> to listen on I<ext_ip:443> and
+B<httpd> to listen on I<localhost:443>: this allows clients
+inside your network to just connect directly to B<httpd>.
+
+Also, B<sslh> probes for SSLv3 (or TLSv1) handshake and will
+reject connections from clients requesting SSLv2. This is
+compliant to RFC6176 which prohibits the usage of SSLv2. If
+you wish to accept SSLv2, use B<--default> instead.
+
+=item B<--ssh> I<target address>
+
+Interface and port on which to forward SSH connections,
+typically I<localhost:22>.
+
+=item B<--openvpn> I<target address>
+
+Interface and port on which to forward OpenVPN connections,
+typically I<localhost:1194>.
+
+=item B<--xmpp> I<target address>
+
+Interface and port on which to forward XMPP connections,
+typically I<localhost:5222>.
+
+=item B<--http> I<target address>
+
+Interface and port on which to forward HTTP connections,
+typically I<localhost:80>.
+
+=item B<--tinc> I<target address>
+
+Interface and port on which to forward tinc connections,
+typically I<localhost:655>.
+
+This is experimental. If you use this feature, please report
+the results (even if it works!)
+
+=item B<--anyprot> I<target address>
+
+Interface and port on which to forward if no other protocol
+has been found. Because B<sslh> tries protocols in the order
+specified on the command line, this should be specified
+last. If no default is specified, B<sslh> will forward
+unknown protocols to the first protocol specified.
+
+=item B<-v>, B<--verbose>
+
+Increase verboseness.
+
+=item B<-n>, B<--numeric>
+
+Do not attempt to resolve hostnames: logs will contain IP
+addresses. This is mostly useful if the system's DNS is slow
+and running the I<sslh-select> variant, as DNS requests will
+hang all connections.
+
+=item B<-V>
+
+Prints B<sslh> version.
+
+=item B<-u> I<username>, B<--user> I<username>
+
+Requires to run under the specified username. 
+
+=item B<-P> I<pidfile>, B<--pidfile> I<pidfile>
+
+Specifies a file in which to write the PID of the main
+server.
+
+=item B<-i>, B<--inetd>
+
+Runs as an I<inetd> server. Options B<-P> (PID file), B<-p>
+(listen address), B<-u> (user) are ignored.
+
+=item B<-f>, B<--foreground>
+
+Runs in foreground. The server will not fork and will remain connected
+to the terminal. Messages normally sent to B<syslog> will also be sent
+to I<stderr>.
+
+=item B<--background>
+
+Runs in background. This overrides B<foreground> if set in
+the configuration file (or on the command line, but there is
+no point setting both on the command line unless you have a
+personality disorder).
+
+=back
+
+=head1 FILES
+
+=over 4
+
+=item F</etc/init.d/sslh>
+
+Start-up script. The standard actions B<start>, B<stop> and
+B<restart> are supported.
+
+=item F</etc/default/sslh>
+
+Server configuration. These are environment variables
+loaded by the start-up script and passed to B<sslh> as
+command-line arguments. Refer to the OPTIONS section for a
+detailed explanation of the variables used by B<sslh>.
+
+=back
+
+=head1 SEE ALSO
+
+Last version available from
+L<http://www.rutschle.net/tech/sslh>, and can be tracked
+from L<http://freecode.com/projects/sslh>.
+
+=head1 AUTHOR
+
+Written by Yves Rutschle

t

@@ -0,0 +1,315 @@
+#! /usr/bin/perl -w
+
+# Test script for sslh
+
+use strict;
+use IO::Socket::INET6;
+use Test::More qw/no_plan/;
+
+# We use ports 9000, 9001 and 9002 -- hope that won't clash
+# with anything...
+my $ssh_address = "ip6-localhost:9000";
+my $ssl_address = "ip6-localhost:9001";
+my $sslh_port = 9002;
+my $no_listen = 9003;  # Port on which no-one listens
+my $pidfile = "/tmp/sslh_test.pid";
+
+# Which tests do we run
+my $SSL_CNX =           1;
+my $SSH_SHY_CNX =       1;
+my $SSH_BOLD_CNX =      1;
+my $SSL_MIX_SSH =       1;
+my $SSH_MIX_SSL =       1;
+my $BIG_MSG =           0; # This test is unreliable
+my $STALL_CNX =         0; # This test needs fixing
+
+# Robustness tests. These are mostly to achieve full test
+# coverage, but do not necessarily result in an actual test
+# (e.g. some tests need to be run with valgrind to check all
+# memory management code).
+my $RB_CNX_NOSERVER =           1;
+my $RB_PARAM_NOHOST =           1;
+my $RB_WRONG_USERNAME =         1;
+my $RB_OPEN_PID_FILE =          1;
+my $RB_BIND_ADDRESS =           1;
+my $RB_RESOLVE_ADDRESS =        1;
+
+`lcov --directory . --zerocounters`;
+
+
+my ($ssh_pid, $ssl_pid);
+
+if (!($ssh_pid = fork)) {
+    exec "./echosrv --listen $ssh_address --prefix 'ssh: '";
+}
+
+if (!($ssl_pid = fork)) {
+    exec "./echosrv --listen $ssl_address --prefix 'ssl: '";
+}
+
+my @binaries = ('sslh-select', 'sslh-fork');
+for my $binary (@binaries) {
+    warn "Testing $binary\n";
+
+# Start sslh with the right plumbing
+    my $sslh_pid;
+    if (!($sslh_pid = fork)) {
+        my $user = (getpwuid $<)[0]; # Run under current username
+        my $cmd = "./$binary -v -f -u $user --listen localhost:$sslh_port --ssh $ssh_address --ssl $ssl_address -P $pidfile";
+        warn "$cmd\n";
+        #exec $cmd;
+        exec "valgrind --leak-check=full ./sslh-select -v -f -u $user --listen localhost:$sslh_port --ssh $ssh_address -ssl $ssl_address -P $pidfile";
+        exit 0;
+    }
+    warn "spawned $sslh_pid\n";
+    sleep 1;  # valgrind can be heavy -- wait 5 seconds
+
+
+    my $test_data = "hello world\n";
+#    my $ssl_test_data = (pack 'n', ((length $test_data) + 2)) .  $test_data;
+    my $ssl_test_data = "\x16\x03\x03$test_data\n";
+
+# Test: SSL connection
+    if ($SSL_CNX) {
+        print "***Test: SSL connection\n";
+        my $cnx_l = new IO::Socket::INET(PeerHost => "localhost:$sslh_port");
+        warn "$!\n" unless $cnx_l;
+        if (defined $cnx_l) {
+            print $cnx_l $ssl_test_data;
+            my $data;
+            my $n = sysread $cnx_l, $data, 1024;
+            is($data, "ssl: $ssl_test_data", "SSL connection");
+        }
+    }
+
+# Test: Shy SSH connection
+    if ($SSH_SHY_CNX) {
+        print "***Test: Shy SSH connection\n";
+        my $cnx_h = new IO::Socket::INET(PeerHost => "localhost:$sslh_port");
+        warn "$!\n" unless $cnx_h;
+        if (defined $cnx_h) {
+            sleep 3;
+            print $cnx_h $test_data;
+            my $data = <$cnx_h>;
+            is($data, "ssh: $test_data", "Shy SSH connection");
+        }
+    }
+
+# Test: Bold SSH connection
+    if ($SSH_BOLD_CNX) {
+        print "***Test: Bold SSH connection\n";
+        my $cnx_h = new IO::Socket::INET(PeerHost => "localhost:$sslh_port");
+        warn "$!\n" unless $cnx_h;
+        if (defined $cnx_h) {
+            my $td = "SSH-2.0 testsuite\t$test_data";
+            print $cnx_h $td;
+            my $data = <$cnx_h>;
+            is($data, "ssh: $td", "Bold SSH connection");
+        }
+    }
+
+# Test: One SSL half-started then one SSH
+    if ($SSL_MIX_SSH) {
+        print "***Test: One SSL half-started then one SSH\n";
+        my $cnx_l = new IO::Socket::INET(PeerHost => "localhost:$sslh_port");
+        warn "$!\n" unless $cnx_l;
+        if (defined $cnx_l) {
+            print $cnx_l $ssl_test_data;
+            my $cnx_h= new IO::Socket::INET(PeerHost => "localhost:$sslh_port");
+            warn "$!\n" unless $cnx_h;
+            if (defined $cnx_h) {
+                sleep 3;
+                print $cnx_h $test_data;
+                my $data_h = <$cnx_h>;
+                is($data_h, "ssh: $test_data", "SSH during SSL being established");
+            }
+            my $data;
+            my $n = sysread $cnx_l, $data, 1024;
+            is($data, "ssl: $ssl_test_data", "SSL connection interrupted by SSH");
+        }
+    }
+
+# Test: One SSH half-started then one SSL
+    if ($SSH_MIX_SSL) {
+        print "***Test: One SSH half-started then one SSL\n";
+        my $cnx_h = new IO::Socket::INET(PeerHost => "localhost:$sslh_port");
+        warn "$!\n" unless $cnx_h;
+        if (defined $cnx_h) {
+            sleep 3;
+            my $cnx_l = new IO::Socket::INET(PeerHost => "localhost:$sslh_port");
+            warn "$!\n" unless $cnx_l;
+            if (defined $cnx_l) {
+                print $cnx_l $ssl_test_data;
+                my $data;
+                my $n = sysread $cnx_l, $data, 1024;
+                is($data, "ssl: $ssl_test_data", "SSL during SSH being established");
+            }
+            print $cnx_h $test_data;
+            my $data = <$cnx_h>;
+            is($data, "ssh: $test_data", "SSH connection interrupted by SSL");
+        }
+    }
+
+
+# Test: Big messages (careful: don't go over echosrv's buffer limit (1M))
+    if ($BIG_MSG) {
+        print "***Test: big message\n";
+        my $cnx_l = new IO::Socket::INET(PeerHost => "localhost:$sslh_port");
+        warn "$!\n" unless $cnx_l;
+        my $rept = 1000;
+        my $test_data2 = $ssl_test_data . ("helloworld"x$rept);
+        if (defined $cnx_l) {
+            my $n = syswrite $cnx_l, $test_data2;
+            my ($data);
+            $n = sysread $cnx_l, $data, 1 << 20;
+            is($data, "ssl: ". $test_data2, "Big message");
+        }
+    }
+
+# Test: Stalled connection
+# Create two connections, stall one, check the other one
+# works, unstall first and check it works fine
+# This test needs fixing.
+# Now that echosrv no longer works on "lines" (finishing
+# with '\n'), it may cut blocks randomly with prefixes.
+# The whole thing needs to be re-thought as it'll only
+# work by chance.
+    if ($STALL_CNX) {
+        print "***Test: Stalled connection\n";
+        my $cnx_1 = new IO::Socket::INET(PeerHost => "localhost:$sslh_port");
+        warn "$!\n" unless defined $cnx_1;
+        my $cnx_2 = new IO::Socket::INET(PeerHost => "localhost:$sslh_port");
+        warn "$!\n" unless defined $cnx_2;
+        my $test_data2 = "helloworld";
+        sleep 4;
+        my $rept = 1000;
+        if (defined $cnx_1 and defined $cnx_2) {
+            print $cnx_1 ($test_data2 x $rept);
+            print $cnx_1 "\n";
+            print $cnx_2 ($test_data2 x $rept);
+            print $cnx_2 "\n";
+            my $data = <$cnx_2>;
+            is($data, "ssh: " . ($test_data2 x $rept) . "\n", "Stalled connection (1)");
+            print $cnx_2 ($test_data2 x $rept);
+            print $cnx_2 "\n";
+            $data = <$cnx_2>;
+            is($data, "ssh: " . ($test_data2 x $rept) . "\n", "Stalled connection (2)");
+            $data = <$cnx_1>;
+            is($data, "ssh: " . ($test_data2 x $rept) . "\n", "Stalled connection (3)");
+
+        }
+    }
+
+    my $pid = `cat $pidfile`;
+    warn "killing $pid\n";
+    kill TERM => $pid or warn "kill process: $!\n";
+    sleep 1;
+}
+
+# Robustness: Connecting to non-existant server
+if ($RB_CNX_NOSERVER) {
+    print "***Test: Connecting to non-existant server\n";
+    my $sslh_pid;
+    if (!($sslh_pid = fork)) {
+        my $user = (getpwuid $<)[0]; # Run under current username
+        exec "./sslh-select -v -f -u $user --listen localhost:$sslh_port --ssh localhost:$no_listen --ssl localhost:$no_listen -P $pidfile";
+    }
+    warn "spawned $sslh_pid\n";
+
+    sleep 1;
+
+    my $cnx_h = new IO::Socket::INET(PeerHost => "localhost:$sslh_port");
+    warn "$!\n" unless $cnx_h;
+    if (defined $cnx_h) {
+        sleep 1;
+        my $test_data = "hello";
+        print $cnx_h $test_data;
+    }
+    # Ideally we should check a log is emitted.
+
+    kill TERM => `cat $pidfile` or warn "kill: $!\n";
+    sleep 1;
+}
+
+
+# Robustness: No hostname in address
+if ($RB_PARAM_NOHOST) {
+    print "***Test: No hostname in address\n";
+    my $sslh_pid;
+    if (!($sslh_pid = fork)) {
+        my $user = (getpwuid $<)[0]; # Run under current username
+        exec "./sslh-select -v -f -u $user --listen $sslh_port --ssh $ssh_address --ssl $ssl_address -P $pidfile";
+    }
+    warn "spawned $sslh_pid\n";
+    waitpid $sslh_pid, 0;
+    my $code = $? >> 8;
+    warn "exited with $code\n";
+    is($code, 1, "Exit status on illegal option");
+}
+
+# Robustness: User does not exist
+if ($RB_WRONG_USERNAME) {
+    print "***Test: Changing to non-existant username\n";
+    my $sslh_pid;
+    if (!($sslh_pid = fork)) {
+        my $user = (getpwuid $<)[0]; # Run under current username
+        exec "./sslh-select -v -f -u ${user}_doesnt_exist --listen localhost:$sslh_port --ssh $ssh_address --ssl $ssl_address -P $pidfile";
+    }
+    warn "spawned $sslh_pid\n";
+    waitpid $sslh_pid, 0;
+    my $code = $? >> 8;
+    warn "exited with $code\n";
+    is($code, 2, "Exit status on non-existant username");
+}
+
+# Robustness: Can't open PID file
+if ($RB_OPEN_PID_FILE) {
+    print "***Test: Can't open PID file\n";
+    my $sslh_pid;
+    if (!($sslh_pid = fork)) {
+        my $user = (getpwuid $<)[0]; # Run under current username
+        exec "./sslh-select -v -f -u $user --listen localhost:$sslh_port --ssh $ssh_address --ssl $ssl_address -P /dont_exist/$pidfile";
+        # You don't have a /dont_exist/ directory, do you?!
+    }
+    warn "spawned $sslh_pid\n";
+    waitpid $sslh_pid, 0;
+    my $code = $? >> 8;
+    warn "exited with $code\n";
+    is($code, 3, "Exit status if can't open PID file");
+}
+
+# Robustness: Can't bind address
+if ($RB_BIND_ADDRESS) {
+    print "***Test: Can't bind address\n";
+    my $sslh_pid;
+    if (!($sslh_pid = fork)) {
+        my $user = (getpwuid $<)[0]; # Run under current username
+        exec "./sslh-select -v -f -u $user --listen 74.125.39.106:9000 --ssh $ssh_address --ssl $ssl_address -P $pidfile";
+    }
+    warn "spawned $sslh_pid\n";
+    waitpid $sslh_pid, 0;
+    my $code = $? >> 8;
+    warn "exited with $code\n";
+    is($code, 1, "Exit status if can't bind address");
+}
+
+# Robustness: Can't resolve address
+if ($RB_RESOLVE_ADDRESS) {
+    print "***Test: Can't resolve address\n";
+    my $sslh_pid;
+    if (!($sslh_pid = fork)) {
+        my $user = (getpwuid $<)[0]; # Run under current username
+        exec "./sslh-select -v -f -u $user --listen blahblah.dontexist:9000 --ssh $ssh_address --ssl $ssl_address -P $pidfile";
+    }
+    warn "spawned $sslh_pid\n";
+    waitpid $sslh_pid, 0;
+    my $code = $? >> 8;
+    warn "exited with $code\n";
+    is($code, 4, "Exit status if can't resolve address");
+}
+
+`lcov --directory . --capture --output-file sslh_cov.info`;
+`genhtml sslh_cov.info`;
+
+`killall echosrv`;
+

t_load

@@ -0,0 +1,128 @@
+#! /usr/bin/perl -w
+
+# Test script for sslh -- mass communication
+
+# This creates many clients that perform concurrent
+# connections, disconnect at any time, and try to generally
+# behave as badly as possible.
+
+# It can be used to test sslh behaves properly with many
+# clients, however its main use is to get an idea of how
+# much load it can take on your system before things start
+# to go wrong.
+
+use strict;
+use IO::Socket::INET6;
+use Data::Dumper;
+
+## BEGIN TEST CONFIG
+
+# Do we test sslh-select or sslh-fork?
+my $sslh_binary = "./sslh-select";
+
+# How many clients to we start for each protocol?
+my $NUM_CNX = 30;
+
+# Delay between starting new processes when starting up. If
+# you start 200 processes in under a second, things go wrong
+# and it's not sslh's fault (typically the echosrv won't be
+# forking fast enough).
+my $start_time_delay = 1;
+
+# If you test 4 protocols, you'll start $NUM_CNX * 4 clients
+# (e.g. 40), starting one every $start_time_delay seconds.
+
+# Max times we repeat the test string: allows to test for
+# large messages.
+my $block_rpt = 4096;
+
+# Probability to stop a client after a message (e.g. with
+# .01 a client will send an average of 100 messages before
+# disconnecting).
+my $stop_client_probability = .001;
+
+# What protocols we test, and on what ports
+# Just comment out protocols you don't want to use.
+my %protocols = (
+    "ssh" => { address => "localhost:9001", client => client("ssh") },
+    "ssl" => { address => "localhost:9002", client => client("ssl") },
+    "openvpn" => {address => "localhost:9003", client => client("openvpn") },
+    "tinc" => {address => "localhost:9004", client => client("tinc") },
+);
+
+##END CONFIG
+
+
+# We use ports 9000, 9001 and 9002 -- hope that won't clash
+# with anything...
+my $sslh_address = "localhost:9000";
+my $pidfile = "/tmp/sslh_test.pid";
+
+sub client {
+    my ($service) = @_;
+
+    return sub {
+        while (1) {
+            my $cnx = new IO::Socket::INET(PeerHost => $sslh_address);
+            my $test_data = "$service testing " x int(rand($block_rpt)+1) . "\n";
+
+            sleep 5 if $service eq "ssh";
+            if ($service eq "openvpn") {
+                syswrite $cnx, "\x00\x0F\x38\n";
+                my $msg;
+                sysread $cnx, $msg, 14; # length "openvpn: \x0\xF\x38\n" => 14
+            }
+            if ($service eq "tinc") {
+                syswrite $cnx, "0 \n";
+                my $msg;
+                sysread $cnx, $msg, 10; # length "tinc: 0 \n" => 10 
+            }
+            while (1) {
+                print $cnx $test_data;
+                my $r = <$cnx>;
+                ($? = 1, die "$service got [$r]\n") if ($r ne "$service: $test_data");
+                last if rand(1) < $stop_client_probability;
+            }
+        }
+        exit 0;
+    }
+}
+
+foreach my $p (keys %protocols) {
+    if (!fork) {
+        exec "./echosrv --listen $protocols{$p}->{address} --prefix '$p: '";
+    }
+}
+
+# Start sslh with the right plumbing
+my $sslh_pid;
+if (!($sslh_pid = fork)) {
+    my $user = (getpwuid $<)[0]; # Run under current username
+    my $prots = join " ", map "--$_ $protocols{$_}->{address}", keys %protocols;
+    my $cmd = "$sslh_binary -f -t 3 -u $user --listen $sslh_address $prots -P $pidfile";
+    print "$cmd\n";
+    exec $cmd;
+    exit 0;
+}
+warn "spawned $sslh_pid\n";
+sleep 2;  # valgrind can be heavy -- wait 5 seconds
+
+
+for (1 .. $NUM_CNX) {
+    foreach my $p (keys %protocols) {
+        if (!fork) {
+            warn "starting $p\n";
+            &{$protocols{$p}->{client}};
+            exit;
+        }
+        # Give a little time so we don't overrun the
+        # listen(2) backlog.
+        select undef, undef, undef, $start_time_delay;
+    }
+}
+
+wait;
+
+
+`killall echosrv`;
+